• You can build the perfect jig in minutes with INCRA?s new Build-It System
• Shooter boards, crosscut boxes, tenoning or tapering jigs and everything in between, the possibilities are endless
• Work with all INCRA Track & INCRA T-Track components and accessories
• Free jig plans available online at: www.incra.com

Product Description
The glue that holds everything together is INCRAs innovative NEW T-Slot Panel Connector. The specially designed aluminum components serve to simultaneously interconnect the panels and provide a rock solid T-Slot for adding and holding jig accessories, fences, stops, Build-It Hold Down Clamps and Build-It L-Brackets. With this new system, set up and connection is easily accomplished with a screwdriver and the included fasteners.

INCRA Build-It T-Slot Panel Connector 24-Inch

• You can build the perfect jig in minutes with INCRA?s new Build-It System
• Shooter boards, crosscut boxes, tenoning or tapering jigs and everything in between, the possibilities are endless
• Work with all INCRA Track & INCRA T-Track components and accessories
• Free jig plans available online at: www.incra.com

Product Description
Build-It Panels are pre-cut and pre-drilled to instantly accept all of the components of the Build-It system.

INCRA Build-It Panel, Large 11-3/4-by-15-1/2-Inch

• Incrementally positioned carriage provides accuracy to .002″ and perfect repeatability
• Five sliding scale template channels
• Easy On, Easy Off for cross-cutting operations and remounts in less than 10 seconds.
• Fence glides eliminate all fence to table contact for a velvet smooth slide to your next cut
• Universal mounting brackets virtually guarantee compatibility with any 10″ table saw, with no drilling, tapping or modifications.

Product Description
The new Incra LS32-TS-WF 32-Inch Table Saw Joinery Fence Super System offers the one thing that every table saw fence should have that none does – Automatic Positioning Control. The INCRA TS-LS is able to position your work instantly and automatically to within 0.002-inch. If you want to repeat a cut, you can return to any former position in less than 5 seconds with ZERO repeatability error. The centrally placed carriage and optimized side mounted clamping system helps the entire unit virtually weld itself together into one solid block of steel and aluminum when locked in place. Shown on a table saw with two optional router table extension wings, which are Not Included Features: TS-LS Specifications: 36-inch Heavy Duty Rip Fence with T-slots on Front and Top Positioning Accuracy: .002-inch over full range Positioning Range – Right of Blade: 32-inch Positioning Range – Left of Blade:  14-inch LS32-WF Specifications: Continuous Micro-Positioning with Audible Dentent Every 1/1000-inch Micro Adjust Wheel with Rotating Bezel and Quick Action Cam Clamp Solid Steel and Aircraft Grade Aluminum Construction Throughout Hardware packs and fully illustrated easy instruction manuals Engraved 32-inch Stainless Steel Magnetic Scale Hairline Cursor and “Big View” Optical Window Incremental Positioning in 1/32-inch Steps Master Reference Guide with 51 Templates Wonder Fence Heavy Duty Split Fence INCRA’S Patented Steel Lead Screw Automatic Work-Centering Scale INCRA LS Positioner 32-inch Right Angle Fixture Hi-Rise Fence Cap INCRA Shop Stop What’s In The Box: LS32WFNCSYS LS32 Positioner TS-IIIAMOUNT Base Mount Unit RAIL72 72-inch Rails TS-IIIA Rip Fence

INCRA LS32-TS-WF TS-LS Table Saw Fence with Wonderfence and Router System Accessories 32-Inch Range

• You can build the perfect jig in minutes with INCRA?s new Build-It System
• Shooter boards, crosscut boxes, tenoning or tapering jigs and everything in between, the possibilities are endless
• Work with all INCRA Track & INCRA T-Track components and accessories
• Free jig plans available online at: www.incra.com

Product Description
Build-It Panels are pre-cut and pre-drilled to instantly accept all of the components of the Build-It system.

INCRA Build-It Panel, Small 7-3/4-by-15-1/2-Inch

• Adjusts for perfect sliding action in any standard miter gauge slot with just a twist of the wrist
• Locks securely in any standard miter gauge slot with another twist of the wrist
• Includes threaded mounting holes and hardware for easy attachment to any application
• Includes plans for a wide variety of shop-made jigs and fixtures
• All mounting hardware included

Product Description
Eliminate the tedious process of making, fitting and adjusting the wooden runners on your sliding table saw jigs. Just screw these special extruded aluminum runners to your jigs and youre ready! Miter sliders have unique expansion mechanisms in their body that perfectly adjust to any standard 3/4″ x 3/8″ miter gauge slot. Each Slider includes plans for building a variety of table saw jigs.

Incra IMS2 24-Inch Incra Miter Slider

• Features ultra precise and parallel steps of 1/32” over a full 8” range.
• Micro adjustable to any position between fixed steps.
• Absolute positioning accuracy to .002” and repeatability to .001”.
• Plastic body.

Product Description
The original Incra Jig is back! Even the novice woodworker can produce beautiful joinery on the router table. Easily create joints such as dovetails, box and double dovetails with precision. Comes with FREE 1-hour instructional DVD and joint-making templates ($19.99 Value) Combo package includes fence, stop block and right angle fixture. Shown with Rockler Offset Router Table (sold separately).

Enjoy precise alignment and repeatability on virtually any power tool in your shop, including router table, table saw, drill press and band saw. Includes box joint template and dovetail & corner post template. Simply set the jig to the color-coded reference marks and make your cuts. No math, no measurements, and no complicated setups. Easy-to-follow DVD has more than one hour of instructions for setup, how to make dovetails, box joints and other common applications. Right angle fixture is made of solid aluminum with 15-ply wood runners. Fence and stop block are made of MDF with durable plastic laminate covering. Pre-drilled for quick and easy attachment to Incra jig. See the Rockler Offset Router Table. It’s specially designed for the Incra Universal Precision Positioning Jig!

Incra Jig, Fence, Stop Block & Right Angle Fixture Combo Package

• Work with all INCRA Track & INCRA T-Track components and accessories
• Free jig plans available online at: www.incra.com

Product Description
The glue that holds everything together is INCRAs innovative NEW T-Slot Panel Connector. These specially designed aluminum components serve to simultaneously interconnect the panels and provide a rock solid T-Slot for adding and holding Build-It Hold Down Clamps.

INCRA Build-It Hold Down Clamp

• Work with all INCRA Track & INCRA T-Track components and accessories
• Free jig plans available online at: www.incra.com

Product Description
With this new system, set up and connection is easily accomplished with a screwdriver and the included fasteners.

INCRA Build-It Brackets with Knobs and Fasteners, 1-1/2-by-2.25-Inch, 2-Pack

• Work with all INCRA Track & INCRA T-Track components and accessories
• Free jig plans available online at: www.incra.com

Product Description
With the INCRA Build-It Knobs, 1/4-20 x 1 1/2″ Bolts and Washers Set, you can easilty attach user made stops and accessories to the T-Slots Connector on your Build-It assemblies. Includes fasteners for material up to 1-inch thick.

INCRA Build-It Knobs, 1/4-20 x 1 1/2″ Bolts, Washers

• Fits any standard miter bar
• Work with all INCRA Build-It System components and accessories
• Free jig plans available online at: www.incra.com

Product Description
Why trust the operation of your Incra Miter Gauge or Miter Slider in just any miter track. The Miter Channel was designed with the same Incra quality and precision to act as the perfect guide for all of your miter needs. Each channel is constructed of hard anodized aluminum for durability with Incras trademark gold finish. Mounting is easy with pre-drilled holes and included fasteners; simply cut a 1-1/8 wide, 1/2 deep groove in your table. Create a laminated fixture using 1/2 thick material on either side of the channel. The T-Slot design can be used in conjunction with hold-downs. Will work with any standard 3/8 x 3/4 miter bar.

INCRA Miter Channel – 48″

• Available in 2 sizes: 18″ and 25.5″
• Super strong steel construction
• Adjusts for a perfect glide in any standard 3/4″ x 3/8″ miter channel
• Compatible with Build-It System panels or create your own custom jig designs

Product Description
INCRA Steel Miter Sliders. The INCRA Miter Slider SE combines the versatility of the INCRA Build-It products with the unique performance and feel of the adjustable GlideLOCK miter bar used on INCRA miter gauges. Miter Slider SE is not recommended for stationary jigs that must be locked into position within a miter slot; choose standard aluminum Miter Slider for these applications. Steel bars are more rigid than wooden or plastic runners and are not susceptible to changes in humidity or temperature. Miter Slider SE bars have (4) #10-24 holes that mate with INCRA Build-It Panels. Miter Slider SE bars also have (3) 1/4″-20 holes along the length to accept knobs and other fasteners commonly used when building jigs and fixtures. Long-wearing Nylon GlideLOCK adjusting discs provide a precise fit in the miter slot of most table saws, router tables and band saws. Nylon GlideLOCK adjusting discs give the bars a smooth, low-friction travel. Bars include removable T-slot retaining clips for BOTH ends of the bar for superior stability of larger jigs. Miter Slider SE is compatible with all INCRA Build-It Panels. Miter Slider SE fits square-sided 3/4″ x 3/8″ miter slots with or without T-slot bottom. GlideLOCK adjustment for slots measuring 0.740″ to 0.765″ in actual width.

INCRA IMS1SE Steel Miter Slider SE 18-Inch

• Table saw that delivers perfect miter cuts the first time
• Exclusive AngleLOCK Indexing System delivers lock solid angle stops
• 364 lock solid angle stops in 5-, 1-, and 1/2-degree increments
• Interlocking grooves in the fence ensure the sharp edge won’t push behind the stop
• Eight expansion points that allow for adjustments to both sides of the bar for ZERO side play

Product Description
Extremely Accurate Miter Gauges Only Incra Could MakeAmazon.com Product Description
Get perfect miter cuts the first time, without any need for trial-and-error, when you use the Incra Miter 3000 Table Saw Miter Gauge. The Incra exclusive AngleLOCK Indexing System delivers 364 lock solid angle stops in 5-, 1-, and 1/2-degree increments over a full 180-degree range with continuous adjustability between all 1/2-degree settings. Combine this with the included GlideLOCK Miter Bar, Incra Flip Fence and the Incra Flip Shop Stop, and you’ll easily achieve mitering accuracy that you never thought possible.

Interlocking grooves in the fence and stop ensure even the sharp edge of mitered work will not push behind the stop. The Miter Gauge also has eight expansion points that allow for adjustments to both sides of the bar for zero side play, and anti-friction travel. This gauge works with all table saws with standard (or near standard) 3/4-by-3/8-inch miter gauge channels, including Delta, Craftsman, and other imports.

Incra MITER3000/27 Miter 3000 Table Saw Miter Gauge

• Fits any standard miter bar
• Work with all INCRA Build-It System components and accessories
• Free jig plans available online at: www.incra.com

Product Description
Why trust the operation of your Incra Miter Gauge or Miter Slider in just any miter track. The Miter Channel was designed with the same Incra quality and precision to act as the perfect guide for all of your miter needs. Each channel is constructed of hard anodized aluminum for durability with Incras trademark gold finish. Mounting is easy with pre-drilled holes and included fasteners; simply cut a 1-1/8 wide, 1/2 deep groove in your table. Create a laminated fixture using 1/2 thick material on either side of the channel. The T-Slot design can be used in conjunction with hold-downs. Will work with any standard 3/8 x 3/4 miter bar.

INCRA Miter Channel – 32″

• Available in 2 sizes: 18″ and 25.5″
• Super strong steel construction
• Adjusts for a perfect glide in any standard 3/4″ x 3/8″ miter channel
• Compatible with Build-It System panels or create your own custom jig designs

Product Description
The INCRA Miter Slider SE combines the versatility of the INCRA Build-It products with the unique performance and feel of the adjustable GlideLOCK miter bar used on INCRA miter gauges. Miter Slider SE is not recommended for stationary jigs that must be locked into position within a miter slot; choose standard aluminum Miter Slider for these applications. Steel bars are more rigid than wooden or plastic runners and are not susceptible to changes in humidity or temperature. Miter Slider SE bars have (4) #10-24 holes that mate with INCRA Build-It Panels. Miter Slider SE bars also have (3) 1/4″-20 holes along the length to accept knobs and other fasteners commonly used when building jigs and fixtures. Long-wearing Nylon GlideLOCK adjusting discs provide a precise fit in the miter slot of most table saws, router tables and band saws. Nylon GlideLOCK adjusting discs give the bars a smooth, low-friction travel. Bars include removable T-slot retaining clips for BOTH ends of the bar for superior stability of larger jigs. Miter Slider SE is compatible with all INCRA Build-It Panels. Miter Slider SE fits square-sided 3/4″ x 3/8″ miter slots with or without T-slot bottom. GlideLOCK adjustment for slots measuring 0.740″ to 0.765″ in actual width.

INCRA IMS2SE Steel Miter Slider SE 25.5-Inch

• 11 angle stops
• 22-1/2-degree special stops
• 27-inch Incra-Lock fence
• Incra ShopStop positioner
• One-year limited warranty

Product Description
The revolutionary NEW Incra miter gauge at long last…solves that frustrating problem – making perfect miter cuts on the table saw or router table.

Incra MITER2000/27 Table Saw Miter Gauge

• Doubles any miter gauge’s crosscut capacity to 24″
• Provides zero clearance for safe and accurate cutting
• “Dock and Lock” any Miter Gauge in seconds
• Included hold down clamp and twin t-slots for secure cutting
• Removable T-Slot Retaining Clips & Adjustable Miter Bar

Product Description
If you own a miter gauge any miter gauge you can turn it into a performance boosting miter sled in just a few seconds by simply docking it in place on top of this unique sled. This sled is a sliding, miter-cutting platform that fully supports and controls your workpiece throughout the cut. Miter gauges drag your board across the table, a sled slides the workpiece giving more support and control creating better, more consistent cuts. The Miter Express is designed to let you instantly drop and lock your miter gauge into the sliding platform. Once docked, it stays put until you undock it to switch back to your regular miter gauge. The sled features a built in miter bar that is adjustable for zero side play tracking, so even if your old miter gauge is loose in the miter slot it becomes rock solid once its locked into the Express. Other features include two embedded T-tracks to secure the included hold down clamp to anchor your workpiece, a locking drop panel that supports the offcut, and also provides zero clearance tear out control. Note: Miter gauge shown in photo available separately.

INCRA MITEREXPRESS Miter Express

• Table saw that delivers perfect miter cuts the first time
• Solid-steel laser cut protracter head and gold anodized Track Fence
• 1 angle stop with indexed stops every 5-degrees
• Precision angle indexing teeth
• 6 expansion points that allow for adjustments to both sides of the bar for ZERO side play

Product Description
Unbeatable accuracy at an affordable price! Includes solid steel laser-cut protractor head, 18″ track fence and sliding stop positioner. Sliding scales fit perfectly in the top slot on the fence to make stop positioning easy, fast and accurate. Whether it’s your basic 90 cut-off, simple pictures frames, complex compound miters, or a 20-sided object, the Miter Gauge 1000 delivers perfect repeatable accuracy every time.Amazon.com Product Description
Get perfect miter cuts the first time, without any need for trial-and-error, when you use the Incra Miter 1000 Table Saw Miter Gauge by Incra. Combining a solid-steel laser cut protracter head with a gold anodized Incra Track Fence, and a red Stop Positioner the sliding scales fit perfectly in the top slot on the fence to make stop positioning easy, fast and accurate. Precision angle indexing teeth are laser cut in solid steel to lock in 41 positive angle stops in 5-degree increments over a full plus or minus 90-degree range.

Other features include a standard miter head, a GlideLOCK miter bar with width that is adjustable in 6 places, an 18-inch track fence, and a sliding stop positioner. The Miter Gauge also has six expansion points that allow for adjustments to both sides of the bar for ZERO side play, and anti-friction travel. Working with all table saws with standard (or near standard) 3/4-by-3/8-inch miter gauge channels, including Delta, Craftsman, and imports. Whether it’s your basic 90-degree cut-off, simple pictures frames, complex compound miters, or a 20-sided object, the Miter 1000 delivers perfect repeatable accuracy every time. This product also comes with a 1-year limited warranty.

Incra MITER1000/18T Miter 1000 Table Saw Miter-gauge

• Combine the INCRA Jig with the INCRA Fence System to produce box joints, dovetails and much more
• Joint making templates plus instructional DVD are included
• Use for a variety of different machines not just router work.

Product Description
Enjoy precise alignment and repeatability on virtually any power tool in your shop, including router table, table saw, drill press and band saw.Includes box joint template and dovetail & corner post template. Simply set the jig to the color-coded reference marks and make your cuts. No math, no measurements, and no complicated setups.Features ultra precise and parallel steps of 1/32″ over a full 8″ range; micro adjustable to any position between fixed steps.With absolute positioning accuracy to .002″ and repeatability to .001″.Plastic body.Easy-to-follow DVD has more than one hour of instructions for setup, how to make dovetails, box joints and other common applications.Fence, stop block and right angle fixture package sold separately. Right angle fixture is made of solid aluminum with 15-ply wood runners. Fence and stop block are made of MDF with durable plastic laminate covering. Pre-drilled for quick and easy attachment to Incra jig.Router bits sold separately. The #91023 1/2′ diameter dovetail bit and the #90462 3/8′ straight bit provide most all of the dovetail and box cuts that you’ll ever need to make. See our Rockler Offset Router Table. It’s specially designed for the Incra Universal Precision Positioning Jig! Includes Rockler Offset Router Table, Fence and your choice of pre-drilled plate. 25971 – Incra Universal Precision Positioning Jig 20196 – Optional Fence, Stop Block & Right angle Fixture sold separately Shaping Cutter Cutting Groove Dado Fence Stop Cutter Incra Right Angle Fixture Joint Dovetail Half Blind Dovetail Through Dovetail Corner Post Dovetail Maple Box CD Box

Original INCRA Jig

• Engraved stainless steel primary scale for precision accuracy
• 41 laser cut V-stops for extreme accuracy at all popular angles
• Patented GlideLOCK miter bar with 6 expansion points for quick repeats
• 18- to 31-inch telescoping incremental miter fence for handling a variety of stock widths
• INCRA Flip Shop Stop-Fence Positioner for optimal mitering accuracy

Product Description
Continuing its well respected tradition of “making accuracy easy”, INCRA® has added the MITER1000™ Incremental Miter Gauge to compliment its incredibly popular MITER2000™. This model features INCRA’s exclusive AngleLOCK™ Indexed Positioning that locks in miter fence angles in remarkably accurate and repeatable 5 degree, 1 degree of 1/2 degree increments over a range of up to 180 degrees, with continuous adjustability in between. It uses INCRA’s patent pending solid steel GlideLOCK™ Miter Bar, that uses up to eight expansion points to adjust both sides of the bar for zero side play with anti-friction travel in any standard (or near standard) miter slot. This means that all of that accuracy in the AngleLOCK™ Miter Head can actually be put to use because the bar won’t wiggle in the slot. The result? You get perfect, gap-free hairline glue joints on all mitered corners without trial and error setups. If that sounds too good to be true, just remember INCRA’s motto: EXACTLY AS PROMISED! And they mean it!Amazon.com Review
A good table saw comes with a perfectly good miter gauge. But this Incra is perfectly great. It’s precise, versatile, infinitely adjustable and custom-fits to your miter gauge slot.

You’re probably familiar with the Incra name because of their fantastic dovetail and box-joint-making jigs, but they’ve got a wide product line all with precision at the top of the list.

An ingenious flip-stop locks down at any point along the fence for repeatable cuts, and it flips out of the way without disturbing your placement if you have other cuts to make as well. The fence actually telescopes out, from a closed length of 18 inches to a fully extended 30 inches for superior stock stability. The miter gauge itself has 41 detents in 5-degree increments across the entire 180 degrees, with special stops at 22-1/2 and 67-1/2 degrees, all gauged by angle indexing teeth for unparalleled accuracy. In addition, you can make 1/10th-degree adjustments with the stainless steel vernier cursor.

The thing we like best about this jig is its ability to custom fit to your miter gauge groove, courtesy of six disks along the length of the slot bar. With a turn of an allen wrench, each one expands or contracts individually to get you the absolute best fit on your table, leaving you with zero play between bar and channel and zero chance for error. Incra’s also designed a neat top-mounted tab that fits a T-slot and removes in a few second for plain channels, letting you move the jig from your T-slotted table saw to other tools with a standard groove, such as a router table.

We’re pretty taken with this setup, and we think anyone who craves precision will love it, too.–Kris Jensen-Van Heste

Incra MITER1000SE Miter Gauge Special Edition With Telescoping Fence and Dual Flip Shop Stop

• Table saw that blends incremental angle control and a special 3-panel sled
• Precision angle indexing teeth are laser cut in solid steel
• 364 lock solid angle stops in 1/2-degree increments
• Ten expansion disks adjust both sides of the bar for zero side play
• Hold down clamp locks your work piece onto the sled

Product Description
Capitalizing on a great idea, the folks a INCRA® have combined their highly successful Miter3000® with the exclusive AngleLOCK® Indexing System with a sled system for the table saw. The sled with T-track and clamping fixture secures the workpiece as one solid unit for precision cross-cutting at any angle. The right-hand portion of the sled, once cut, secures to the right miter slot of your table saw by means of a miter slider and functions as a zero clearance cut-off table that’s perfectly aligned with the main sled. Since this system includes precision angle adjustment, stop positioner and clamping sled for superior workpiece control, all possibility for cutting error has been eliminated and each cut is predictable and precise. Finally, a perfect cross-cutting system for your table saw! Order the replacement Panel for maintaining zero clearance for different blades and compound angle cutting. Please see above for Miter3000® specifications.Amazon.com Product Description
The Miter 5000 Table Saw Miter Gauge blends the incremental angle control features of the Miter 3000SE with a very special 3-panel Sled for the ultimate miter cutting workstation for the table saw. The sled with two aluminum T-tracks and clamping fixture secures the work piece as one solid unit for precision cross-cutting at any angle. The tracks are embedded in the MDF panel top to secure an included work piece hold-down clamp and to provide absolute rigid support for the 36- to 64-inch telescoping IncraLOCK Cuto-off Fence.

The right-hand portion of the sled, once cut, secures to the right miter slot of your table saw by means of a miter slider and functions as a zero clearance cut-off table that’s perfectly aligned with the main sled. Since this system includes precision angle adjustment, stop positioner and clamping sled for superior work piece control, all possibility for cutting error has been eliminated and each cut is predictable and precise. Also featured with every Miter 5000 is a simple and incredibly useful hold down clamp which locks your work piece onto the sled for maximum accuracy and the cleanest cuts possible.

Ten expansion disks adjust both sides of the bar for zero side play, anti-friction travel on all table saws with standard 3/4-by-3/8-inch or near-standard miter gauge channels, including Delta, Craftsman, and imports. This means that all of Incra’s incredible precision will actually show up in your work because the bar won’t wiggle around in the miter slot. Also included are Special Edition Miter Fence telescopes from 18- to a full 31-foot length. The dual flip shop stop and Incra’s patented automatic positioning control also come standard with this model. AngleLOCK Indexing Precision angle indexing teeth are laser cut in solid steel to lock in 364 positive angle stops in 1/2-degree increments over a full 180-degree range. Interlocking grooves in the fence and stop ensure even the sharp edge of mitered work will not push behind the stop. The fence locking bracket creates a monolithic rigid platform and fence when tightened down. Quickly set using the included standard hex tool, this feature takes an already strong platform into the rigidity level expected in any professional machining environment.

Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence