• Straight and very fast cuts
• Plunge Cuts in hard/soft woods, OSB, Plywood 1/4″ – 2-3/8″

Product Description
- 4″; 6TPI – Bosch shank – For straight & curve cutting in wood up to 2-3/8″ thick

Bosch T144D3 4-Inch, 6TPI, HCS Bosch Shank Jigsaw Blade, 3 Pack

• Easy to follow instructions
• Shop tested measured drawing and instructions
• Wood plans contain no hardware, materials or accessories
• The sliding-door cupboards can stand alone or be stacked up
• Overall dimensions of stacked cabinets; 52″ wide, 20″ deep and 82″ high

Product Description
Divided glass panes and traditional moldings give these stacked cabinets a stately look, while wide sides create deep, ample display room. You can make two cabinets and stack them, or build just one to serve as a base cabinet. Overall dimensions of stacked cabinets: 52″ wide, 20″ deep, and 82″ high.

SLIDING DOOR CUPBOARD WOODWORKING PAPER PLAN PW10051

• 4-1/2″ grinding wheel
• For use on angle grinders
• Industrial grade, aluminum oxide grinding wheel for heavy-duty cutting, grinding, and material remov
• Ideal for low angle and vertical grinding
• A24R grit

Product Description
4-1/2″ grinding wheel. For use on angle grinders. Industrial grade, aluminum oxide grinding wheel for heavy-duty cutting, grinding, and material removal applications. double reinforced for increased life and faster cuts. Ideal for low angle and vertical

Black & Decker/DWLT DW8404 Metal Depressed-Center Grinding Wheel

• Dual track combines Miter T-Track and Mini T-Track into one solid extrusion.
• One side of the track accommodates a standard 3/4″ x 3/8″ miter gauge with or without T-slot.
• The other side fits a standard 1/4″ x 20 hex head bolt, for setup of feather boards, stops, etc.
• This track will also accept our T-bar – Sold Separately
• Primarily used on router tables, table saw extensions and drill press tables. Made in USA

Product Description
This track can be inlayed into any router table or table saw extensions to maximize the tables capabilities. The track gives both a track to slide jigs and miter bars in as well as a hold down slot for toggle clamps and other hold downs. MADE IN USA

48″ MITER MINI T-TRACK/STANDARD MITER T-TRACK COMBO – PW1029

• saber saw blade fine grit jigsaw edge

Product Description
Universal shank to fit all standard jig and saber saws. Tungsten carbide grit is permanently bonded to a tough alloy blade body to provide higher abrasion resistance than bi metal. Ideal for cutting a wide range of materials including ceramic tile, brick,

M. K. Morse SCTCG27M Grit Jigsaw Blade

• Easy to follow instructions
• Shop tested measured drawing and instructions
• Simple joinery
• Wood plans contain no hardware, materials or accessories
• The planter’s finished size is 19″ tall and will accept up to 16″ square or round pot

Product Description
Spruce up your outdoor spaces with this 19″-tall, cedar-trimmed planter. It accepts up to a 16″ square or round pot for showing off your colorful plantings. For an even more impressive project, add the to your Planter Box.

PATIO PERFECT PLANTER BOX WOODWORKING PAPER PLAN PW10005

• Includes P201 drill with 1/2-inch heavy-duty chuck and 24-position clutch
• Drill RPM: 0-440/0-1,600 (no load speed)
• Includes P501 circular saw with blade and edge guide
• Includes P510 reciprocating saw with blades
• Includes P700 flashlight, charger, two batteries, and tool bag

Product Description
This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes Torque IV Drill – P201, Circular Saw With Carbide Tipped Blade And Edge Guide – P501, Flashlight – P700, Reciprocating Saw With Blades – P510, (2) Rechargeable batteries – P100, 1-hr Diagnostic Charger – P110, Tool Bag

Factory-Reconditioned Ryobi ZRP841 18-Volt Super Combo Kit

• Paper woodworking plan.
• Super comfortable Adirondack chair – folds flat for storage
• This classic chair uses simple joints for construction using solid wood
• Full pattern for easy cutting with instructions for assembly.
• WOOD NOT INCLUDED

Product Description
Using the same classic lines as the rest of our Adirondack furniture, this handsome piece folds up at the end of the season for those short on space. (WOOD NOT INCLUDED)

FOLDING ADIRONDACK CHAIR – PAPER WOODWORKING PLAN

• Clean for Wood blades ensure fine, clean cuts in a variety of materials
• T-shank blades suitable for jig saws from Bosch, AEG, Dewalt, ELU, Hitachi, Makita, Metabo, Milwaukee and others
• Applications in Laminated particleboard, Chipboard, Plywood, Hard/soft wood, Plastics 3/16″ – 1-1/4″
• Bosch is the world-wide market leader for jig saw blades.
• This means uncompromising quality, innovative ideas and universal use.

Product Description
Bosch T101BR100 4″, 10TPI, HCS Bosch Shank Jigsaw Blade (100 Pack)Bosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work.Bosch T101BR100 4″, 10TPI, HCS Bosch Shank Jigsaw Blade (100 Pack) Features:; Bosch is the world-wide market leader for jig saw blades. This means uncompromising quality, innovative ideas and universal use. Whether for miter, straight or curved cuts, Bosch sells the right saw blade designed for high performance in all major brand jig saws. ; T-shank Jig Saw Blades for Wood ; Item # T101BR100; Type Clean for Wood; Overall Length 4 ; Working Length 3.03 ; Blade Height 0.28 ; Blade Thickness 0.06 ; Teeth Per Inch 10; Material HCS; Tooth Design taper ground back; Application chipboard, plywood, hard/soft wood & plastics 3/16 – 1-1/4 ; Type of Cut top of workpiece; straight, fine down cuts; Quantity 100

Bosch T101BR100 4″ x 10 TPI T-Shank Style Jigsaw Blades 100-Pack

Product Description
Features Bosch style Tang shank, (T shank). Eliminates set screw mounting hole, which is most common breaking point on Universal Mounting jigsaw blades. Packed 5 blades per card. No. T101B: Wood cutting, 4″ long, 10 TPI, for straight fine cuts No. T101BR:

Robt Bosch Tool Corp Accy T119BO Jigsaw Blades

Product Description
Features Bosch style Tang shank, (T shank). Eliminates set screw mounting hole, which is most common breaking point on Universal Mounting jigsaw blades. Packed 5 blades per card. No. T101B: Wood cutting, 4″ long, 10 TPI, for straight fine cuts No. T101BR:

Robt Bosch Tool Corp Accy T123X Jigsaw Blades

• controled cuts
• safety
• if you own a table saw you should own a grr-ripper

Product Description
Enjoy the ultimate workshop companion. This advanced model of the GRR-Ripper utilizes all the same innovative features of the GR-100 but comes with two additional accessories that improve the control and expandability of the GRR-Ripper System. The GR-200 is built to meet the needs of the professional woodworker or extreme hobbyist. With enhanced versatility features, the GR-200 will perform operations that were before very dicey and time-consuming with ease and speed. Whether you are making razor-thin veneer strips, building miniatures, or creating exquisite furniture you will save time, materials, and fingers with the GRR-Ripper. The GR-200 includes these additional accessories:

The Adjustable Spacer – This accessory adds increased gripping surface for tackling larger stock. It also adds one inch of cutting width to the GRR-Ripper.

The Stabilizing Plate – The Stabilizing Plate adds a new dimension of control to the GRR-Ripper. It is particularly useful when cutting small narrow pieces of stock. Excellent for affixing user-built jigs.

The Stabilizing Plate also performs as the secondary fence that travels with the GRR-Ripper along the left side of the stock. It holds the off-cut piece in its original position through the entire cutting operation. Some users call it a “Feather Board Plate” without the force to pinc

Grr-ripper 200

• Fully independent fence faces for use as a vertical jointer
• Universal mounting design for tables between 3/4- and 1-1/2-inches thick
• Fully-enclosed tubular aluminum extrusion
• Cam-style lockdown
• Self-squaring T-square style design

Product Description
Through a series of ground-breaking new features including the innovative self-squaring t-square style fence, the fully enclosed tubular aluminum extrusion provides an entirely new way to work.

Kreg PRS1010 36-inch Precision Router Table Fence

• Scuff resistant
• Easily cut to length with scissors
• perfect for use in Kreg Top Trak and Heavy Duty Trak

Product Description
4 left-to-right reading measuring tape that slides into the recess on the bottom of the Mini Trak for increased accuracy.

Kreg KMS7727 4 Non-Adhesive Measuring Tape

• Two 51″ aluminum extrusions included
• Two “C” clamps included
• Interlock to make a full 102″ straight edge

Product Description
Get accurate, professional results cutting plywood, trimming doors, scoring wallboard, cutting linoleum, carpeting, and wallpaper. This guide is made of two 51″ aluminum extrusions that interlock to make a full 102″ straight edge. Two C clamps are included which may be positioned anywhere along the guide for secure alignment.

8-1/2 Cutting Guide

• Cuts any shape straight lines in seconds
• Cuts 90 degree corners in one pass
• Cuts curves arches and odd shapes fast and neat
• Replacement blades are easy to change simply push ejection button and install the new cartridge.
• Two magnetic halves mirror each other cutting both sides of the drywall at the same time

Product Description
Cut both sides of drywall simultaneously using magnets to guide bottom cut. Works with 1 2” or 5 8” board. Cut curves, corners, shapes, and straight lines with ease. Reduces time it takes to score and cut drywall.

Goldblatt G15850 Blade Runner Drywall Cutting Tool

Product Description
PS07500 Features: -Hole saw set. -Includes 0.75”, 0.88”, 1”, 1.13”, 1.25”, 1.5”, 2”, 2.5”, 3”, 3.5”, 4”, 5” and 0.25” sizes. -Material: Steel. -Also includes 0.38” mandrel and a 0.25” drill bit. -Cut clean, smooth holes in drywall, plaster or wood. -Hex wrench blow mold case. -Dimensions: 2” H x 9” W x 6” D.

19 Piece Hole Saw Set

• 4″ Length, Bi-Metal Construction
• 6 Teeth per Inch, Milled
• U-Shank / Universal
• 2 Blades per Package
• Replaces U111DF

Product Description
Tough, sharp, shatterproof bimetal blades for cutting steel, nail embedded wood, masonite, conduit, composition materials, laminated counter tops. 1 4” shank. Fits most jigsaws. 2 blades per card. No. BT314J: 3”, 14TPI, metal cutting No. BT318J: 3”, 18TPI, metal cutting No. BT324J: 3”, 24TPI, metal cutting No. BT332J: 3 5 8”, 32TPI, very thin metal cutting No. BT450J: 4”, 10TPI, wood cutting No. BT450JR: 4”, 10TPI, flush cut wood No. BT456J: 4 1 2”, 6TPI, wood cutting No. BT480J: 4 1 2”, 10TPI, wood cutting No. BT486J: 4 1 2”, 6TPI, wood cutting No. GT300J: 3”, grit edge for cutting ceramic and tile cutting

Lenox BT486J Lenox Jigsaw Blade

• Powerful 3.2 amp motor provides 0-3200 strokes per minute
• 2-finger single speed trigger that provides added comfort and controlled cutting
• Lock-on button reduces user fatigue
• Blade roller support improves accuracy and extends blade life
• Dust blower clears debris for better visibility

Product Description
Dust blower removes debris from the cut line. Blade support roller for acurate cutting. Blades storage compartment for extra blades. 3.2A, 3200 SPM.

Black & Decker 7662B OPP Single Speed Jigsaw

• 4″ Length, Bi-Metal Construction
• 10 Teeth per Inch, Milled
• U-Shank / Universal
• 2 Blades per Package

Product Description
Tough, sharp, shatterproof bimetal blades for cutting steel, nail embedded wood, masonite, conduit, composition materials, laminated counter tops. 1 4” shank. Fits most jigsaws. 2 blades per card. No. BT314J: 3”, 14TPI, metal cutting No. BT318J: 3”, 18TPI, metal cutting No. BT324J: 3”, 24TPI, metal cutting No. BT332J: 3 5 8”, 32TPI, very thin metal cutting No. BT450J: 4”, 10TPI, wood cutting No. BT450JR: 4”, 10TPI, flush cut wood No. BT456J: 4 1 2”, 6TPI, wood cutting No. BT480J: 4 1 2”, 10TPI, wood cutting No. BT486J: 4 1 2”, 6TPI, wood cutting No. GT300J: 3”, grit edge for cutting ceramic and tile cutting

Lenox BT480J Lenox Jigsaw Blade

Product Description
High carbon steek blades designed for wood cutting and scroll cuts in wood. Fleam ground teeth for faster, rough cuts, and straight line sawing. Tang shank (T shank) fits most jigsaws. Packed 2 blades per card. No. CTS406S: 4″, 6TPI, milled and set, fast,

Lenox CT456S Lenox Jigsaw Blade

• CT 48 Capacity: 12.7 gallon (48 L)
• CT 48 Dimensions (LxWxH): 38.5″ x 6.5″ x 28.75″
• CT 48 Weight: 29.8 lbs.
• CT 48 Power Cord 12 AWG: 24.5′ length

Product Description
The new CT48 incorporates increased capacity, innovation and versatility into this new design. With the dual mode power activation, the user chooses either a tool activated or manual activated start-up. This CT (Cleantec) unit is extremely mobile, with a sturdy chassis, extra large low abrasion rear tires, and double swivel casters up front to easily negotiate any obstacle. The CT48 dust extractor can be secured in place with a single point foot brake. The filter bags have even been redesigned to be self cleaning. These bags inflate and deflate with the cycling of the unit for maximum suction force and efficiency. An integrated hose garage has been added for easy hose storage. As with all Festool dust extractors, the CT48 utilizes the Sys-Dock system that facilitates the use/storage of one or more Systainers to the top of the unit. It will work wet or dry with no complex conversion, and it is remarkably quiet. Includes: CT 48E – 12.7 gallon HEPA Mobile Dust Extractor, HEPA filter, (1) fitted self-cleaning filter bag, and (1) 1 1/16″ x 11.5 antistatic suction hose. With a full 720 watts, this is one of the most powerful jigsaws around. It will cut 4-3/4″ wooden beams, 3/4″ aluminum or 3/8″ steel with ease! Electronic Multi-Material Speed Control gives you the correct constant speed for the material youre sawing – prevents overheating and keeps the saw running smoothly. Patented triple blade guidance with parallel adjustable carbide guides that counteract the lateral pressure on the blade so that the Trion makes straight perpendicular cuts every time. Can set a bevel to 45 degrees on either side, and can even start cuts in wood without a pilot hole. 6 Amp motor, 1″ stroke, 1,000-9,000 spm, 4 stage stroke adjustment. Jigsaw includes a blade, splinter guard, Systainer (stackable storage container) and chip deflector.

Festool PS 300 EQ Jigsaw with T-LOC + CT 48 Dust Extractor Package

• CT 48 Capacity: 12.7 gallon (48 L)
• CT 48 Dimensions (LxWxH): 38.5″ x 6.5″ x 28.75″
• CT 48 Weight: 29.8 lbs.
• CT 48 Power Cord 12 AWG: 24.5′ length

Product Description
The new CT48 incorporates increased capacity, innovation and versatility into this new design. With the dual mode power activation, the user chooses either a tool activated or manual activated start-up. This CT (Cleantec) unit is extremely mobile, with a sturdy chassis, extra large low abrasion rear tires, and double swivel casters up front to easily negotiate any obstacle. The CT48 dust extractor can be secured in place with a single point foot brake. The filter bags have even been redesigned to be self cleaning. These bags inflate and deflate with the cycling of the unit for maximum suction force and efficiency. An integrated hose garage has been added for easy hose storage. As with all Festool dust extractors, the CT48 utilizes the Sys-Dock system that facilitates the use/storage of one or more Systainers to the top of the unit. It will work wet or dry with no complex conversion, and it is remarkably quiet. Includes: CT 48E – 12.7 gallon HEPA Mobile Dust Extractor, HEPA filter, (1) fitted self-cleaning filter bag, and (1) 1 1/16″ x 11.5 antistatic suction hose. With a full 720 watts, this is one of the most powerful jigsaws around. It will cut 4 3/4″ wooden beams, 3/4″ aluminum or 3/8″ steel with ease! Electronic Multi-Material Speed Control gives you the correct constant speed for the material youre sawing – prevents overheating and keeps the saw running smoothly. Patented triple blade guidance with parallel adjustable carbide guides that counteract the lateral pressure on the blade so that the Trion makes straight perpendicular cuts every time. Can set a bevel to 45 degrees on either side, and can even start cuts in wood without a pilot hole. 6 Amp motor, 1″ stroke, 1,000-9,000 spm, 4 stage stroke adjustment. Jigsaw includes: blade, splinter guard, chip deflector and T-LOC Systainer #1 storage container.

Festool PSB 300 EQ Jigsaw with T-LOC + CT 48 Dust Extractor Package

• Bosch
• T101D100
• Jigsaw Blades

Product Description
Bosch T101D100 4″, 6TPI, HCS Bosch Shank Jigsaw Blade (100 Pack)Bosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work.Bosch T101D100 4″, 6TPI, HCS Bosch Shank Jigsaw Blade (100 Pack) Features:; Bosch is the world-wide market leader for jig saw blades. This means uncompromising quality, innovative ideas and universal use. Whether for miter, straight or curved cuts, Bosch sells the right saw blade designed for high performance in all major brand jig saws. ; T-shank Jig Saw Blades for Wood ; Item # T101D100; Type Clean for Wood; Overall Length 4 ; Working Length 2.95 ; Blade Height 0.28 ; Blade Thickness 0.06 ; Teeth Per Inch 5-6; Material HCS; Tooth Design taper ground back; Application laminated particleboard & plastics 1/4 – 2-3/8 ; Type of Cut Straight, clean cuts; plunge cuts; Quantity 100

Bosch T101D100 4″, 6TPI, HCS Bosch Shank Jigsaw Blade

• Ideal for softwood, hardwood, melamine, veneered plywood, and chipboard.
• Conical ground teeth for fine cuts, saving time on rework.
• HCS tool steel quality, 3 inches long, 6 TPI, for materials up to 2 1/8 inches.
• Universal T-shank design fits most professional jigsaws.
• Made from high-quality materials in Germany

Product Description
The S75/4FS jigsaw blade is the golden strandard of jigsaw blades. This jigsaw blade is thicker than any other jigsaw blade available on the market. The benefit? Perpendicular cuts can be made even in thick and hard to cut materials. Combined with a Festool jigsaw, the S75/4FS blade can make perpendicular cuts in materials up to 2 1/8 inches. The conical ground teeth design is perfect for fine cuts in even hard to cut materials. Thicker than any other jigsaw blade, the S145/4 FSG TRION is the standard by which other blades are measured. When combined with the Festool jigsaw, the S145/4 FSG TRION is capable of making perpendicular cuts in hard to cut materials up to 4 3/4 inches thick with speed and ease. The cross-set tooth design is ideally suited for making very fast cuts in softwoods, hardwoods, melamine, veneered plywood, and chipboard, among many others. Festool jigsaw blades are engineered for cutting efficiency, long life, and superior cutting results, with a universal T-shank design that fits most professional jigsaws. Festool has the right blade for any application or type of material, ensuring precise and consistent results. In order to select the right jigsaw blade for your application, think first about the type of material you want to cut, since there are blades available for wood, plastics, non-ferrous metals, steel, and special materials like fiberglass, foam, and other materials. Next decide what kind of cut you need: fine, fast, scroll, clean. This will help to decide which blade is right for you. All Festool jigsaw blades are made in Germany from high-quality materials for the best possible cutting results. Pack of 20 jigsaw blades.

Festool 490256 S 75/4 FS TRION Jigsaw Blade, 3 Inch, 6 TPI, 20-Pack

• Designed for use with Magswitch Universal Mounting Base
• One set of precision sealed roller bearings

Product Description
The Magswitch Resaw Guide Tool Attachment is for use with the Magswitch Workholding System. It mounts to the Universal Mounting Base and features roller bearing support for firm yet smooth gliding of wood through a bandsaw blade or sander.

MagSwitch Resaw Fence Only

• 20753-CT450SR JIG BLD T-SH DCT
• JIGSAW BLADE T-SHANK D-CUT

Product Description
High carbon steek blades designed for wood cutting and scroll cuts in wood. Fleam ground teeth for faster, rough cuts, and straight line sawing. Tang shank (T shank) fits most jigsaws. Packed 2 blades per card. No. CTS406S: 4″, 6TPI, milled and set, fast,

Lenox CT450SR Lenox Jigsaw Blade

• Two Finger Trigger with Lock On
• Quick Change Foot and Easy angle changes
• Blade Storage Keeps blades with tool
• Open Foot Design :Improves visibility of cutting area
• Dust Blower Keeps cut line clear

Product Description
Skil proudly presents the new 4290 Opening Price Point Jigsaw. The Skil 4290 Jigsaw has one the highest price to performance ratios among branded power tools. Its quick change foot allows for easy angle changes and the quick blade change makes changing blades a snap. With on tool blade storage and a 4.5 amp motor, this tool is a great value for any customer!

2 Pack Skil 4290-02 Jigsaw 4.5 Amp VS

Product Description
High carbon steek blades designed for wood cutting and scroll cuts in wood. Fleam ground teeth for faster, rough cuts, and straight line sawing. Tang shank (T shank) fits most jigsaws. Packed 2 blades per card. No. CTS406S: 4″, 6TPI, milled and set, fast,

Lenox CT320SC Lenox Jigsaw Blade

• Precision ground for smooth cutting
• U-Shank Design

Product Description
Wood Cutting: Precision ground teeth for fast smooth cutting in hard and soft wood, plastics, laminate particle board and plywood. Metal Cutting: Fully hardened teeth for cutting ferrous and non-ferrous metals, aluminum and sheet steel.

Irwin 3071410D Marathon 4″ x 10-TPI Fleam Ground U-Shank Jigsaw Blades 2 per Package

• 3-5/8″ Length, Bi-Metal Construction
• 14 Teeth per Inch, Milled
• T-Shank
• 2 Blades per Package
• Replaces T188BF/T118B

Product Description
Tough, sharp, shatterproof bimetal blades for cutting steel, nail embedded wood, masonite, conduit, composition materials, laminated counter tips. Tang shank (T shank) fits most jigsaws. 2 blades per card. No. BT314S: 3 5 8″, 14TPI, thick metal cutting, g

Lenox BT314S T-Shank Jigsaw Blade

• Woodcraft Magazine’s ClassicTM Shop Plans
• These plans are the “best of” the projects from Editors of Woodcraft Magazine
• Each plan features step by step instructions with detail photographs,
• For beginner or an accomplished woodworker

Product Description
Build a sliding tablesaw jig for accurate sawing of large workpieces. This workshop workhorse includes a long-board extension rail and stop for making repeated cuts. Woodcraft Magazines Classic Shop Plans These plans are the “best of” the projects from Editors of Woodcraft Magazine. Each plan features step by step instructions with detail photographs, exploded illustrations for various project steps, a cut list and cutting diagram, and a Convenience Plus Buying Guide so you know exactly what supplies are required to complete the project. Whether you are a beginner or an accomplished woodworker, the Woodcraft Classic Plan series will have a plan for you!

Dead On Accurate Crosscut Sled – Paper Plan

• blade jigsaw jig saw metal cutting

Product Description
Stronger, thicker body design of cobalt steel reduces blade breakage. Exclusive curved tooth design provides highest quality cuts and lasts up to 3 times longer than conventional jigsaw blades. Universal shank. No. DW3720H2: 14TPI, 3″ long, cuts 1 4″ to 3

Black & Decker/DWLT DW3728-5 Metal Cutting Cobalt Jigsaw Blade

• Jigsaw with laser guidance; 5.8 amp motor; 4-stage orbital action
• Variable speed; 4-inch depth of cut; bevel adjustment from 0 to 45 degrees left and right
• Magnesium alloy construction for lightweight durability
• Includes jigsaw, 10 blades, rip fence, case
• 5.9 pounds; 2-year warranty

Amazon.com Product Description
The GMC LS750PJM Magnesium Pendulum Action Jigsaw features the Redeye Laser Line Generator for improved operator cutting vision, faster set-up, increased accuracy and safer operation. Many of this jigsaw’s components are constructed of magnesium alloy for superior strength, lighter weight, and increased durability. The reduced weight ensures greater user comfort, easier control, and improved maneuverability. It also features a three-stage pendulum cutting action that allows for faster cutting through various materials. GMC’s trademarked Switchblade tool-free blade change makes for the quickest, easiest blade changes.

The LS750PJM jigsaw uses Redeye Laser Line Generator for improved cutting vision, faster set-up, increased accuracy, and safer operation.

Magnesium construction for light weight, superior strength, and durability. View larger.

Three-stage pendulum action for faster cutting through various materials.

Equipped with a powerful 750-watt motor, this saw is ready for the toughest jobs. And with a variable speed of 800 to 3000 SPM (strokes per minute), you’ll be in total control, no matter what the cut or the material. For greater versatility, the LS750PJM offers a bevel adjustment of 0-to-45-degrees, left and right, with a 100-millimeter depth of cut. Other features include a lock-on button that allows continuous operation without the need to hold the switch depressed, a rubber grip handle, and a dust extraction port. This saw also includes a carry case and ten blades.

About GMC Magnesium
With a continuous thirst for innovation, GMC invests heavily in research and design and has kept a close watch on innovations in non-powertool industries, such as aerospace and sporting goods. As a result, its tools feature design elements that reflect changes in those industries’ various material developments. For instance, GMC tools have benefited enormously from the use of magnesium in their design.

So what’s so special about magnesium? It’s simple: magnesium is lighter, stronger, and more durable. In fact, it is the lightest of the structural metals — 75-percent lighter than steel, 50-percent lighter than titanium, and 32-percent lighter than aluminum. Many power tools on the market feature extensive use of aluminum, which can make them heavy to hold over extended periods of use. Unlike aluminum, magnesium components are lighter weight, and therefore reduce user fatigue and increase safety. Magnesium offers superior strength compared to other materials commonly used in the manufacturing process. This superior strength helps increase the durability and life of your tool for a longer period of time under rigid and frequent use.

About Redeye Laser Guidance System
Designed for the serious do-it-yourselfer, the Redeye range includes jigsaws, circular saws, miter saws, tile cutting saws, table saws, band saws, scroll saws, hammerdrills, and drill presses. Each Redeye equipped tool features a laser line generator incorporated into the product to provide unparalleled accuracy, faster set-up, and improved safety. The laser line generates a narrow beam of pure red light to provide an exact straight guide line that allows for the more accurate cuts and superior finishes. This laser guide is clearly visible and, unlike a pencil mark, it is never obscured by sawdust or debris. You can clearly see the laser line while you’re standing upright, keeping your face well away from sawdust and wood chips. With Redeye on your side, not only will you be more efficient, but you’ll also minimize your risk of injury.

What’s in the Box
GMC LS750PJM Magnesium Pendulum Action Jigsaw with Redeye, ten blades, and carry case.

GMC AJS58LS 5.8 Amp Top Handle Jigsaw with Laser

• Card Qty: 5
• Material: Bi-metal
• Overall Length: 5-1/4″
• T5001P Qty: 1
• T5001R Qty: 1

Product Description
Bosch T345XF Ideal For Thick and Thin Materials. Progressive Tooth Spacing For Fast Cuts.

Bosch 5/PK,5-IN Progressor Universal #T345XF

• Compact and lightweight (4.0-pounds) for easy handling
• Tilting base for bevel cutting up to 45-degrees
• Adjustable cutting depth to 55/64-inch at 90-degrees and 45/64-inch 45-degrees
• Blade lock for easy blade replacements
• Comfortable non-slip grip for better control; 1-year warranty

Product Description
Versatile, lightweight, and super-compact, this 3-3/8-inch cordless circular saw is the perfect cordless tool for cutting tasks too big for the handsaw yet too small for a standard circular saw. Great for cutting sheets, trim, rows of dowels, flooring, you name it, this saw handles anything from remodeling in tight quarters to trimming down material for craftwork. The kit includes the battery and charger so you’re up and running out of the box. The saw features a tilting base for bevel cutting up to 45 degrees. A no-load speed of 1,000 rpm’s means this handy little 3-3/8-inch saw gets the cutting done quickly. The saw is just over a foot long and weighs just 4 pounds for easy handling in tight quarters and at awkward angles. An adjustable cutting depth to 55/65 inches at 90 degrees and 45/64 inches at 45 degrees lets you take on a wide variety of tasks. A blade lock prevents slippage and offers faster blade changes. A comfortable, non-slip grip ensures better control. And, with the optional diamond wheel and water supply kit (sold separately), this saw cuts tile and glass. Your purchase includes the combination blade, hex wrench, battery, and charger.Amazon.com Review
Versatile, lightweight, and super-compact, this 3-3/8-inch cordless circular saw is the perfect cordless tool for cutting tasks too big for the handsaw yet too small for a standard circular saw. Great for cutting sheets, trim, rows of dowels, flooring, you name it, this saw handles anything from remodeling in tight quarters to trimming down material for craftwork. The kit includes the battery and charger so you’re up and running out of the box.

The saw features a tilting base for bevel cutting up to 45 degrees. A no-load speed of 1,000 rpm’s means this handy little 3-3/8-inch saw gets the cutting done quickly. The saw is just over a foot long and weighs just 4 pounds for easy handling in tight quarters and at awkward angles. An adjustable cutting depth to 55/65 inches at 90 degrees and 45/64 inches at 45 degrees lets you take on a wide variety of tasks. A blade lock prevents slippage and offers faster blade changes. A comfortable, non-slip grip ensures better control. And, with the optional diamond wheel and water supply kit (sold separately), this saw cuts tile and glass. Your purchase includes the combination blade, hex wrench, battery, and charger. –Brian D. Olson

Applications:
Light remodeling, crafts, cutting sheets, trim, rows of dowels, flooring.

What’s in the Box
9.6V Battery 9000 (632007-4), charger DC9700 (113103-2), combination blade (721003-8), hex wrench (783202-0)

Makita 5090DW 9.6-Volt 3-3/8-Inch Cordless Circular Saw Kit

• Ideal for non-ferrous metals, aluminum, iron, sheet steel, extrusions, and more
• Corrugated blade with precision milled teeth for fine cuts in tough materials.
• 4 1/8 inches long, 13 TPI, for materials up to 3 3/8 inches.
• Universal T-shank design fits most professional jigsaws.
• Made from high-quality materials in Germany

Product Description
Includes 4-1/8″ (105mm) 13 TPI Jigsaw Blades (5 pk) – 486559

Festool 486559 HS 105/2 bi Metal-Cutting Jigsaw Blade, 4 1/8 Inch, 13 TPI, 5-Pack

• Solid 1 1/4 ” thick cast iron
• Machined 90 degrees on three sides
• Includes dial indicator

Product Description
This multi purpose tool revolutionizes dial indicator usage in the work shop. Originally designed for setting exact height adjustments of jointer knives and accurately setting jointer cutting depth, uses for this versatile tool do not stop here. The solid 1-1/4″ thick cast iron frame is precision machined at 90 degrees on three sides so you can check squareness of, or accurately position, joiner fences, saw blades or tilting tables of scroll saws and drill presses. The dial indicator has 1-1/32″ of travel for a full 1″ measurement in .001″ increments. Dial indicator includes a round tip for checking run out and flat tip for saw blade, dado head, or router bit height adjustments.

Oneway Multi Gauge

• Quick and easy to use
• Safest way to cope molding using a jigsaw
• Includes detailed instructions with photo illustrations
• Great for remodeling, new construction and home improvements
• Durable tools designed by a professional carpenter

Product Description
Easy to use BaseCoper is a durable jig that makes coping any size baseboard molding a simple task using your jigsaw. Take the guess-work out of coping crown molding and baseboards! Coping is the preferred way to fit inside corners of crown molding and baseboard. Coped molding is actually one piece fitting over the other piece, instead of the two being mitered at the inside corner.

Base Molding Coper

• Plans and complete instructions for building 10 classic tables
• Step-by-step instructions and clear illustrations.
• Design guidelines for creating your own tables.
• Numerous tips & jigs you can use for all your projects.

Product Description
From a Shaker sewing table to a display table for art objects, Tables offers 10 excellent reasons to spend quality time in the shop. Whether you are a beginner or an experienced woodworker, the projects offered by Anthony GUIDICE in this book will provide plenty of challenges to increase your skills. The table projects include a candlestand, an end table, a Shaker sewing table, two coffee tables, a display table, a half-round console table, a hall table, a cherry kitchen table, and a trestle table.

TABLES BY ANTHONY GUIDICE

• This is Bosch’s economical blade for basic cuts in metal
• Application: sheet metal 10-to-16-Gauge, thin metals 1/16-Inch-to-1/8-Inch (ferrous and nonferrous, pipes 2-1/2-Inch in diameter, tube stock, angle iron
• Benefits: makes straight cuts in pipes, profiles and sheet metal
• TPI: 24
• Overall length: 5-1/4-Inch

Product Description
Features Bosch style Tang shank, (T shank). Eliminates set screw mounting hole, which is most common breaking point on Universal Mounting jigsaw blades. Packed 5 blades per card. No. T101B: Wood cutting, 4″ long, 10 TPI, for straight fine cuts No. T101BR:

Bosch T318A 5-1/4-Inch 24-TPI High-Speed Steel Bosch Shank Jigsaw Blade, 5-Pack

• Greater precision – Super sharp to cut fast without deflection.
• Smoother finish- Ground to precision sharpness for straighter cuts and a smoother Finish.
• Ideal for woodworking- Designed for optimal performance in wood cutting, including hardwoods.
• Shatter resistant – Bi-metal technology flexes and resists breaking and extends blade life.

Product Description
BT410S, 2 Pack, 4-1/2′ x 3/8′ x .050 x 10 Tooth, T Shank Style Jig Saw Blade, Cuts Woods 1/4′ To 2′, All Steels 1/8′ To 1/2′, Soft Metals 1/8′ To 1′.

Lenox 20306 Bi-Metal T Shank Blade

Product Description
All Metal Protractor which can be used alone to mark-up work, with the circular saw as a width guide or with the table saw as a angle cut guide

CEL Protractor WS1-PT01

• Surface corresponding to 1000 grit
• Fine grinding and reduction of grinding marks

Product Description
This jig is for changing the function of the grindstone. The Tormek grindstone is constructed so that with the Stone Grader it can be treated to change its property from fast grinding to fine grinding, i.e. sharpening. The grading of the grindstone is made by pressing the fine side of the Stone Grader onto the grindstone, which makes it work as a fine-grit stone (approximately 1000 grit). When pressing the coarse side onto the grindstone, the smoothened surface is returned to its normal condition (220 grit). This process does not place excessive wear on the grindstone and can be repeated any number of times. For use with the Tormek T-7 and T-3 sharpening systems.

Tormek SP-650 Stone Grader

Product Description
RAD64000516 Features: -Price Is For One Package -Minimum Order Of 1. -E-Style & E-R bi-metal reciprocating saw blades are ideal for cutting pipe and metals including stainless steel and nail-embedded wood. .-RADNOR B818 BIMETAL MEDIUM METAL.-Tough, shock resistant alloy teeth withstand high cutting temperatures Long lasting. -UNSPC CODE: 27112802. -Jigsaw, Recips, Hacksaw, Hole Saw Blades .-BLADE RECIP 8X3/4X035 18T 25/PK.

8″ X 3/4″ X .050″ X 18 Tooth Per Inch Style B818 Radnor Reciprocating Saw Blade

• Bosch’s 14 piece contractor set of t-shank blades.
• Application: Kit for use in a variety of cutting applications for both metal and wood.
• Benefits: Comes with bonus carrying case.
• TPI: Varied
• Overall Length: Varied

Product Description
Includes T-Shank Jigsaw Blade Set (14 Pc.) – T14CPSC, (2) 3″ 12 TPI Jig Saw Blade – T119BO, 4″ 6 TPI Jig Saw Blade – T144DP, (2) 4″ 10 TPI Jig Saw Blade – T101B, (3) Progressor Wood Blade – T234X, (1) Progressor Metal Blade – T123X, (2) 3″ 14 TPI Jig Saw Blade – T118B, (2) 3″ 24 TPI Jig Saw Blade – T118A, (1) 3″ 36 TPI Jig Saw Blade – T118G, Carry Pouch

BOSCH T14CPSC 14 Piece Bosch Shank Jigsaw Blade Set With Pouch

• 3″ Length, Bi-Metal Construction
• Medium Carbide Grit Cutting Edge
• T-Shank
• 2 Blades per Package
• Replaces T130RF3

Product Description
Tough, sharp, shatterproof bimetal blades for cutting steel, nail embedded wood, masonite, conduit, composition materials, laminated counter tips. Tang shank (T shank) fits most jigsaws. 2 blades per card. No. BT314S: 3 5 8″, 14TPI, thick metal cutting, g

Lenox GT300S T-Shank Jigsaw Blade

• 4″ Length, Bi-Metal Construction
• 10 Teeth per Inch, Ground
• U-Shank / Universal
• 2 Blades per Package
• Replaces U101BF

Product Description
Tough, sharp, shatterproof bimetal blades for cutting steel, nail embedded wood, masonite, conduit, composition materials, laminated counter tops. 1 4” shank. Fits most jigsaws. 2 blades per card. No. BT314J: 3”, 14TPI, metal cutting No. BT318J: 3”, 18TPI, metal cutting No. BT324J: 3”, 24TPI, metal cutting No. BT332J: 3 5 8”, 32TPI, very thin metal cutting No. BT450J: 4”, 10TPI, wood cutting No. BT450JR: 4”, 10TPI, flush cut wood No. BT456J: 4 1 2”, 6TPI, wood cutting No. BT480J: 4 1 2”, 10TPI, wood cutting No. BT486J: 4 1 2”, 6TPI, wood cutting No. GT300J: 3”, grit edge for cutting ceramic and tile cutting

Lenox BT450J Lenox Jigsaw Blade

• 2-3/4″ long
• 17 teeth per inch
• 1/4″ universal shank

Product Description
Sold as 10 each. 2-3/4″ long. 17 teeth per inch. 1/4″ universal shank. For cutting steel and iron 1/8″ to 1/4″ thick and aluminum, brass, copper and lead to 1/8″ thick. Carded. Manufacturer number: 0130075. SKU #: 2035418. Country of origin: Switzerland. Distributed by Bosch Tool Group-Vermont Amer.

10 each: Ace Bimetal Jigsaw Blade

• Overall Length: 4″
• Quantity: 5
• Teeth Per Inch: 8
• Type: Basic for Wood
• Type of Cut: Fast, course cuts, ideal for jigsaws without orbital action

Product Description
T111C – Basic for Wood 4 Jigsaw Blade. 3 working length. Fast, course cuts, ideal for jigsaws without orbital action. Soft wood, OSB, plywood, 7/32 – 2 3/8. 5-pack.

Bosch 4″ 8TPI, Fast Cut HCS T-Shank Jigsaw Blade

• Bi-Metal Blade for durability
• Universal Airsaw connection
• High Speed Steel Teeth for longer lasting cutting edge

Product Description
25-Pack Bi-Metal Shatter Resistant Air Saw Blades

Lenox Tools 20423B418T 418T Airsaw Blade, 25-Pack

• Basic for Metal blades are the economical choice for cutting sheet metal and thin metals (ferrous and non-ferrous)
• 1/4 In. universal shank (U-shank) blades are suitable for jig saws from Skil, Black & Decker and others
• When cutting metal, remember to use cutting oil, turpentine or a mixture of turpentine & petroleum oil to cool jig saw blade
• Designed for straight cuts in medium-thin metals 1/8 In. to 1/4 In.

Product Description
3 Pack, 2-3/4″, 14TPI, High Speed Steel, Universal Shank, Jigsaw Blade, Used On Ferrous & Nonferrous Mediun Thin Metals 1/8″ – 1/4″ For Straight Cuts.

Bosch U118B3 2-3/4-Inch, 14TPI, HSS U-Shank Jigsaw Blade, 3 Pack

• Sommerfeld’s new Tongue & Groove Cabinetry System DVD
• From face frame to hardware installation, Marc covers it all.
• This system combines the best of Old World joinery with the advantages of New World tooling.
• This system that will make every joint & every project faster, stronger & more accurate.
• This DVD will show you how this system will work for you.

Product Description
Whether you are an occasional woodworker or a seasoned pro, this exciting DVD shows how the system will work for you. Combining Old World joinery with the advantages of New World tooling, the result is a system that will make every joint & every project faster, stronger & more accurate.

CABINET MAKING MADE EASY with Marc Sommerfeld

Amazon.com Product Description
Can’t fit a square peg in a round hole? Drill a new one! The Delta 17-924 Mortising Attachment attaches to your dress press and turns it into a mortising machine. Includes four popular mortising chisel and bit sets and convenient carrying case along with attachment. Use it with Delta models 11-980, 11-990, 14-070 & 17-900 drill presses and 11-090 radial drill press; and Sears model 21313, 21315 & 21317 drill presses.

DELTA 17-924 Mortising Attachment with 1/4 Inch, 5/16 Inch, 3/8 Inch, and 1/2 Inch Chisel and Bit Sets

• Fits any table saw with a 3/4” X 3/8” miter groove.
• Adjustable back stop range of 0 – 45 degrees.
• Cast iron and steel construction

Product Description
Safety, accuracy and repeatability are the hallmarks of this heavy-duty tenoning jig. Designed to fit any table saw with a 3/4′ X 3/8′ miter groove, this jig will hold your stock in a precise position. The adjustable back stop will support stock from 0 degrees to 45 degrees. The width of the cut is controlled with a fine-threaded adjustment knob. Constructed of cast iron and steel.

Shop Fox Tenoning Jig – D3246

• 50″ – 2 clamps in 1 extrusion which do not separate
• Low profile jaws
• Can be used as a straight edge guide for sawing and routing
• Pro -Grip Solid Back To Back Clamps are best used in pairs
• Clamps sold 1 each clamp – 2nd clamp, wood and sander in photo Not Included

Product Description
The Back to Back Solid Clamp is two clamps in one extrusion which do not separate. Secure two Pro-grip back to back solid clamps to your work bench with the lower jaws and then clamp your stock between the top jaws. This set-up turns your workbench into a large vise, allowing you to perform, glue ups, sanding and even routing. With the low profile jaws on these clamps your work surface is never obstructed. The back to back solid clamps can also be as a straight edge guide for sawing, routing and will accept any of the PRO-GRIPTM Power Tool Guide Plates.

50″ Pro-Grip Solid Back To Back Edge Clamp By Peachtree Woodworking PW586

• Paper woodworking plan.
• Easily sized to fit any space
• The one shown occupies a 111×148″ “footprint”
• You will learn how to increase or decrease its dimensions as needed.
• WOOD NOT INCLUDED

Product Description
Add elegance to your outdoor living with this airy pavilion. Easily sized to fit any space, this versatile pergola will enhance your deck, patio, or yard. The one shown here occupies a 111×148″ “footprint,” but you will learn how to increase or decrease its dimensions as needed.

BUILD-TO-SUIT PERGOLA – PAPER WOODWORKING PLAN

• Selectable five-stage orbital saw blade movement and low blade support roller ensures accurate cuts
• Electronic variable speed controlled by adjusting dial
• Quick tool-free blade clamping system
• Includes plastic carrying case
• One full year parts and labor warranty, 30 day risk free performance guarantee

Product Description
Includes STEB135 Plus 1-in 5-Stage Variable Speed Jig Saw – 611000980, Allen Wrench – 344161530, Jig Saw Blade, Anti-Splintering Insert – 623665000, Carrying Case – 625446000

Metabo STEB 135 Plus-Top Handle Jigsaw

• Easy to follow instructions
• Shop tested measured drawing and instructions
• Simple joinery
• Wood plans contain no hardware, materials or accessories

Product Description
Give your comforters, blankets, and pillows a stylishly handsome home with this heirloom-quality Arts and Crafts storage project.

FOREVER CHERISHED BLANKET CHEST WOODWORKING PAPER PLAN PW10043

• Ideal for thin non-ferrous metals, aluminum, iron, sheet steel, extrusions, and other similar materials
• Corrugated blade with precision milled teeth for fine cuts in tough materials.
• 6 inches long, 21 TPI, for up to 5 1/8 inch.
• Universal T-shank design fits most professional jigsaws.
• Made from high-quality materials in Germany

Product Description
The HS 105/2bi jigsaw blade is a longlife, bimetal blade for cuts in thin non-ferrous metals, aluminum, iron, sheet steel, extrusions, etc. The precision milled teeth of this corrugated blade are extremely tough and last a long time, even in hard to cut materials. This is the ideal blade for fine cuts in thin and tough materials, where a high number of TPI is required. Festool jigsaw blades are engineered for cutting efficiency, long life, and superior cutting results, with a universal T-shank design that fits most professional jigsaws. Festool has the right blade for any application or type of material, ensuring precise and consistent results. In order to select the right jigsaw blade for your application, think first about the type of material you want to cut, since there are blades available for wood, plastics, non-ferrous metals, steel, and special materials like fiberglass, foam, and other materials. Next decide what kind of cut you need: fine, fast, scroll, clean. This will help to decide which blade is right for you. All Festool jigsaw blades are made in Germany from high-quality materials for the best possible cutting results. Pack of 5 jigsaw blades.

Festool 490180 HS 155/2 bi Metal-Cutting Jigsaw Blade, 6 Inch, 21 TPI, 5-Pack

• Card Qty: 5
• Material: High Speed Steel
• Overall Length: 3″
• T5001P Qty: 1
• T5001R Qty: 1

Product Description
Item #: 114-T118B. For thick material

• Applicable Materials = Mild Steel, Non-Ferrous Soft Metal
• Cutting Edge Material = HSS
• Cutting Length = 3 in
• Material Overall Shank Type = “T”
• Tang Shape = Straight
• Teeth Per Inch = 14
• Tooth Shape = Wavy Set & Milled
• Type = Jig Saw
• Quantity = 5 per pack

Customers also search for: Tools and Storage\Power Tools\Cutting Tools\Jig Saw Parts and Accessories Discount Dwos 3″ 14 TPI Jig Saw Bladebosch Shank, Buy Dwos 3″ 14 TPI Jig Saw Bladebosch Shank, Wholesale Dwos 3″ 14 TPI Jig Saw Bladebosch Shank, 000346270938, T118B, Jig Saw Parts and Accessories

Bosch 3-IN; 14TPI; HSS Bosch Shank #T118B

• Jig saw blade that is precision ground for smooth cutting
• U-Shank Design

Product Description
Wood Cutting: Precision ground teeth for fast smooth cutting in hard and soft wood, plastics, laminate particle board and plywood. Metal Cutting: Fully hardened teeth for cutting ferrous and non-ferrous metals, aluminum and sheet steel.

Irwin 3071406 Marathon 4″ x 6-TPI Fleam Ground U-Shank Jigsaw Blades 2 per Package

• Jigsaw Blade
• BLADE

Product Description
Stronger, thicker body design of cobalt steel reduces blade breakage. Exclusive curved tooth design provides highest quality cuts and lasts up to 3 times longer than conventional jigsaw blades. Universal shank.

B & D DW3720-5 3in 14t Mtl Jigsaw Blade

Product Description
High carbon steek blades designed for wood cutting and scroll cuts in wood. Fleam ground teeth for faster, rough cuts, and straight line sawing. Tang shank (T shank) fits most jigsaws. Packed 2 blades per card. No. CTS406S: 4″, 6TPI, milled and set, fast,

Lenox CTS406S Lenox Jigsaw Blade

• Universal Plus
• Bi-Metal
• 10 TPI
• Swiss Made by Skil
• Multi Purpose

Product Description
3 pk of 10 TPI Skil Bi-Metal Jigsaw Blades

3 pk Jigsaw Blades 10 TPI Bi-Metal Universal Plus

• You can build the perfect jig in minutes with INCRA?s new Build-It System
• Shooter boards, crosscut boxes, tenoning or tapering jigs and everything in between, the possibilities are endless
• Work with all INCRA Track & INCRA T-Track components and accessories
• Free jig plans available online at: www.incra.com

Product Description
The glue that holds everything together is INCRAs innovative NEW T-Slot Panel Connector. The specially designed aluminum components serve to simultaneously interconnect the panels and provide a rock solid T-Slot for adding and holding jig accessories, fences, stops, Build-It Hold Down Clamps and Build-It L-Brackets. With this new system, set up and connection is easily accomplished with a screwdriver and the included fasteners.

INCRA Build-It T-Slot Panel Connector 24-Inch

• Lenox
• 20337-BT456J
• Jigsaw Blades

Product Description
Tough, sharp, shatterproof bimetal blades for cutting steel, nail embedded wood, masonite, conduit, composition materials, laminated counter tops. 1 4” shank. Fits most jigsaws. 2 blades per card. No. BT314J: 3”, 14TPI, metal cutting No. BT318J: 3”, 18TPI, metal cutting No. BT324J: 3”, 24TPI, metal cutting No. BT332J: 3 5 8”, 32TPI, very thin metal cutting No. BT450J: 4”, 10TPI, wood cutting No. BT450JR: 4”, 10TPI, flush cut wood No. BT456J: 4 1 2”, 6TPI, wood cutting No. BT480J: 4 1 2”, 10TPI, wood cutting No. BT486J: 4 1 2”, 6TPI, wood cutting No. GT300J: 3”, grit edge for cutting ceramic and tile cutting

Lenox BT456J Lenox Jigsaw Blade

• Ideal for softwood, hardwood, melamine, veneered plywood, and chipboard.
• Cross-set teeth for fast cuts, extra thick for perpendicular cuts, saving time on rework.
• HCS tool steel quality, 4 1/8 inches long, 6 TPI, for perpendicular cuts in materials up to 3 3/8 inches.
• Universal T-shank design fits most professional jigsaws.
• Made from high-quality materials in Germany for professional use.

Product Description
Replacement blades for the Festool PS 300 EQand PSB 300 EQ Jigsaw. 4-1/8″ Jigsaw Blade cross-set teeth for fast cutting. 3-3/8″ max. cut thickness, for hard and softwood, and chipboard. 5 pack.

Festool 486552 S 105/4 FSG TRION Jigsaw Blade, 4 1/8 Inch, 6 TPI, 5-Pack

• Power Consumption: 2.9 – 10 amps @ 120V
• 9.5 gallon (36 L) Container Capacity
• 96″ Static Water Lift
• With a full 720 watts, this is one of the most powerful jigsaws around
• It will cut 4 3/4″ wooden beams, 3/4″ aluminum or 3/8″ steel with ease

Product Description
With a full 720 watts, this is one of the most powerful jigsaws around. It will cut 4 3/4″ wooden beams, 3/4″ aluminum or 3/8″ steel with ease! Electronic Multi-Material Speed Control gives you the correct constant speed for the material youre sawing – prevents overheating and keeps the saw running smoothly. Patented triple blade guidance with parallel adjustable carbide guides that counteract the lateral pressure on the blade so that the Trion makes straight perpendicular cuts every time. Can set a bevel to 45 degrees on either side, and can even start cuts in wood without a pilot hole. 6 Amp motor, 1″ stroke, 1,000-9,000 spm, 4 stage stroke adjustment. Jigsaw includes: blade, splinter guard, chip deflector and T-LOC Systainer #1 storage container. The new CT36 incorporates increased capacity, innovation and versatility into this new design. With the dual mode power activation, the user chooses either a tool activated or manual activated start-up. This CT (Cleantec) unit is extremely mobile, with a sturdy chassis, extra large low abrasion rear tires, and double swivel casters up front to easily negotiate any obstacle. The CT36 dust extractor can be secured in place with a single point foot brake. The filter bags have even been redesigned to be self cleaning. These bags inflate and deflate with the cycling of the unit for maximum suction force and efficiency. An integrated hose garage has been added for easy hose storage. As with all Festool dust extractors, the CT36 utilizes the Sys-Dock system that facilitates the use/storage of one or more Systainers to the top of the unit.. Will work wet or dry with no complex conversion, and is remarkably quiet. Includes: CT 36 E – 9.5 Gallon HEPA Mobile Dust Extractor, HEPA Filter, (1) Fitted Filter Bag, and (1) 1 1/16″ x 11.5 Antistatic Suction Hose.

Festool PSB 300 EQ Jigsaw with T-LOC + CT 36 Dust Extractor Package

• Power Consumption: 2.9 – 10 amps @ 120V
• 6.9 gallon (26 L) Container Capacity
• Max Suction Force – 137 CFM
• With a full 720 watts, this is one of the most powerful jigsaws around
• Multi-Material Speed Control gives you the correct constant speed for the material you’re sawing

Product Description
With a full 720 watts, this is one of the most powerful jigsaws around. It will cut 4-3/4″ wooden beams, 3/4″ aluminum or 3/8″ steel with ease! Electronic Multi-Material Speed Control gives you the correct constant speed for the material youre sawing – prevents overheating and keeps the saw running smoothly. Patented triple blade guidance with parallel adjustable carbide guides that counteract the lateral pressure on the blade so that the Trion makes straight perpendicular cuts every time. Can set a bevel to 45 degrees on either side, and can even start cuts in wood without a pilot hole. 6 Amp motor, 1″ stroke, 1,000-9,000 spm, 4 stage stroke adjustment. Jigsaw includes a blade, splinter guard, Systainer (stackable storage container) and chip deflector. The new CT26 incorporates increased capacity, innovation and versatility into this new design. With the dual mode power activation, the user chooses either a tool activated or manual activated start-up. This CT (Cleantec) unit is extremely mobile, with a sturdy chassis, extra large low abrasion rear tires, and double swivel casters up front to easily negotiate any obstacle. The CT26 dust extractor can be secured in place with a single point foot brake. The filter bags have even been redesigned to be self cleaning. These bags inflate and deflate with the cycling of the unit for maximum suction force and efficiency. An integrated hose garage has been added for easy hose storage. As with all Festool dust extractors, the CT26 utilizes the Sys-Dock system that facilitates the use/storage of one or more Systainers to the top of the unit.. Will work wet or dry with no complex conversion, and is remarkably quiet. Includes: CT 26 E – 6.9 Gallon HEPA Mobile Dust Extractor, HEPA Filter, (1) Fitted Filter Bag, and (1) 1 1/16″ x 11.5 Antistatic Suction Hose.

Festool PS 300 EQ Jigsaw with T-LOC + CT 26 Dust Extractor Package

• Standard Mounting on the US-105
• Used for Honing with Jigs
• Wheel Must Run Away from Edge when Honing
• Used for Grinding Away from the Edge
• Was Once Sold Seprately as an Accessory

Product Description
Tormek XB-100 Horizontal Base for the Universal Support was once sold as an accessory, but now is mounted as standard on the US-105. The horizontal base is used for honing with jigs. The honing must always be done with the wheel running away from the edge. The horizontal base is also used for grinding away from the edge.

Tormek XB-100 Horizontal Base for the Universal Support

• This DVD offers basic design & variations teaching different woodworking techniques
• Learn to create practical items or a gift that will become an heirloom.
• Great for beginners & any woodworker interested in small projects.
• Most projects discussed can be made in a weekend with wood leftover from another project.

Product Description
Box making is perfect for beginning woodworkers interested in gaining skills, experimenting with design, & feeling satisfaction at a project that can be completed without the time & expense of a bigger project. This DVD will offer basic designs along with many variations to teach different woodworking techniques while learning to create a practical item or gift that will become an heirloom.

BASIC BOX MAKING with Doug Stowe DVD

• T-Track has 1/8″ wall which will not bow or twist, center drilled for easy mounting
• Standard 1/4″ hex head bolt that slides into the track
• Build jigs & fixtures for your radial arm saw, workbench, drill press, miter saw
• Mount anti-kickback devices to your table saw fence or router table fence
• One FREE knob and bolt

Product Description
24″ Mini-T-Track made of 90% recycled aluminum to help save the environment. The track is 3/4″ wide and 3/8″ high. Center drilled for easy mounting. The key to our system is a standard 1/4″ hex head bolt that slides into the track. No more hunting for hard to find T-bolts or special locking pieces.

24″ Aluminum Mini-T-Track by Peachtree Woodworking – PW1021

• For use on leather wheels
• Creates razor sharp edges

Product Description
Use this honing compound on the Tormek leather honing wheels to create a razor-sharp edge. For use with the Tormek T-7 and T-3.

Tormek PA-70 Honing Compound

• Paper woodworking plan.
• Construction is simple using dado, rabbet, & groove joinery.
• Photo shows box made with curly maple & wenge. (WOOD NOT INCLUDED)
• Full pattern for easy cutting with instructions for assembly.
• Choose your favorite wood for a distinctive look all your own.

Product Description
Looking to craft a unique item to delight someone special? This stylish chest, make with eye-catching curly maple & wenge (not included) is just the ticket. Though the project looks sophisticated, the construction’s surprisingly simple, thanks to the straightforward dado, rabbet, & groove joinery.

JEWELRY BOX – PAPER WOODWORKING PLAN

• Basic for Metal blades are the economical choice for cutting sheet metal and thin metals (ferrous and non-ferrous)
• T-shank blades suitable for jig saws from Bosch, AEG, Dewalt, ELU, Hitachi, Makita, Metabo, Milwaukee and others
• When cutting metal, remember to use cutting oil, turpentine or a mixture of turpentine & petroleum oil to cool jig saw blade
• Medium-thin metals 5/64″ – 5/16″ (ferrous & nonferrous)
• Pipes & profiles diameters 5/64″ – 3-1/8″

Product Description
5-1/4 HIGH SPEED STEEL JIGSAW BLADE – 14 TPI. Straight cuts in pipes, profiles and sheet metal. Used on sheet metal 5/64 – 5/16.

Bosch T318B 5-1/4″ x 14 TPI HSS T-Shank Metal Blades 5-Pack

• Basic for Metal blades are the economical choice for cutting sheet metal and thin metals (ferrous and non-ferrous)
• T-shank blades suitable for jig saws from Bosch, AEG, Dewalt, ELU, Hitachi, Makita, Metabo, Milwaukee and others
• When cutting metal, remember to use cutting oil, turpentine or a mixture of turpentine & petroleum oil to cool jig saw blade
• Medium-thin metals 5/64″ – 5/16″ (ferrous & nonferrous)
• Pipes & profiles diameters 5/64″ – 3-1/8″

Product Description
5-1/4 HIGH SPEED STEEL JIGSAW BLADE – 14 TPI. Straight cuts in pipes, profiles and sheet metal. Used on sheet metal 5/64 – 5/16.

Bosch T318B 5-1/4″ x 14 TPI HSS T-Shank Metal Blades 5-Pack

• With Oregon Sure Sharp chain saw file you can manually file and sharpen your chain
• Easy way to manually sharpen a chainsaw–an accurately filed saw chain reduces fatigue
• Complete with built-in and easy instructions
• File not included
• Ships at 11.2-ounces

Product Description
Manual Sure Sharp, An Easy Way To Manually Sharpen A Chain Saw, Provides Accurate Cutter Sharpening, Complete With Built-In Handle & Easy Instructions, File Not Included.Amazon.com Review
With the P308 Sure Sharp chain saw file you can manually file and sharpen your chain. An accurately filed saw chain can help reduce your fatigue. Dial the angle, depth, and file height settings; once set, the file angle and depth settings lock, keeping your sharpening consistent as you work. Complete instructions are included, which is good, because some complex assembly is required.

Oregon 23820 Sure Sharp Chain Saw Manual Filing/Sharpening Guide

• 4″ Length, Bi-Metal Construction
• 10 Teeth per Inch, Ground – Down Cut
• U-Shank / Universal
• 2 Blades per Package

Product Description
Tough, sharp, shatterproof bimetal blades for cutting steel, nail embedded wood, masonite, conduit, composition materials, laminated counter tops. 1 4” shank. Fits most jigsaws. 2 blades per card. No. BT314J: 3”, 14TPI, metal cutting No. BT318J: 3”, 18TPI, metal cutting No. BT324J: 3”, 24TPI, metal cutting No. BT332J: 3 5 8”, 32TPI, very thin metal cutting No. BT450J: 4”, 10TPI, wood cutting No. BT450JR: 4”, 10TPI, flush cut wood No. BT456J: 4 1 2”, 6TPI, wood cutting No. BT480J: 4 1 2”, 10TPI, wood cutting No. BT486J: 4 1 2”, 6TPI, wood cutting No. GT300J: 3”, grit edge for cutting ceramic and tile cutting

Lenox BT450JR Lenox Jigsaw Blade

Product Description
High carbon steel blades designed for wood cutting and scroll cuts in wood. Fleam ground teeth for faster, rough cuts, and straight line sawing. Packed 2 blades per card. No. CTS406J: 4″, 6TPI, milled and set, fast, rough wood cutting No. CT456J: 4″, 6TPI

Lenox CT320JC Lenox Jigsaw Blade

• Vermont American 2-3/4In 18Tpi Carbide Jigsaw 30003
• VERMONT AMERICAN

Product Description
Carbide teeth for heavy-duty use. Used for cutting stainless steel, Corian, ceramic tile and other abrasive materials.

Carbide Tip Jigsaw, 18 Tpi

• 3 Piece pack is ideal for fast cuts and long life in thick or thin metal, pipes and metal profiles
• Progressor patented tooth design is ideal when cutting through various thicknesses of material
• Designed to cut sheet metal up to 8 gauge, metal 5/64 – 3/8 In., stainless steel 1/16 – 1/8 In., non-ferrous metal 5/64 – 3/4 In., plastics 1/16 – 1 1/4 In., fiberglass 3/64 – 3/4 In. thick
• T-shank blades are suitable for jig saws from Bosch, AEG, Dewalt, ELU, Hitachi, Makita, Metabo, Milwaukee and others

Product Description
Bosch T123X3 Ideal for thick and thin Material. Progressive Tooth Spacing For Fast Cuts.

Bosch T123X3 4-Inch, ProgressorHSS Bosch Shank Jigsaw Blade, 3 Pack

• Finished size is 7-1/2″ x 10″
• Made up of 25 pieces
• Does not include materials needed to complete project plan

Product Description
Includes full size patterns, wood suggestions and a cutting legend. 25 pieces; finished size: 7-1/2″ x 10″ tall. Rounding the edges of the pieces and mounting to a backboard will add depth to this project.

Squirrel Intarsia Scrollsaw Plan

• The Winfield Collection Full Size Woodcraft Patterns #WC4 — Peace on Earth Angels.
• Package includes a complete pattern to make the yard display shown & easy painting instructions.
• Complete list of materials included with provided instructions.
• All pieces simply slide or screw together.
• Easily comes apart for space saving flat storage.

Product Description
Send passersby your message of peace with these three 47″ tall angels! All pieces simply slide or screw together. Easily disassembles for space saving flat storage.
This full size woodcraft pattern is a part of the fun, easy-to-make projects from the Winfield Collection! Be sure to look for additional patterns to add to your project list!

Peace on Earth Angels Christmas Yard Art Woodworking Plan

• P44731K – Wood – scroll cutting
• P44735K – Fast rough cut – wood
• P44749K – Particleboard – fiber board
• P44753K – Fast cut – wood, fiberboard and particleboard
• P44754K – Clean cut – wood, particleboard

Product Description
Bi-Metal Blades – Universal Shank

Bi-Metal Blades 4″ 6-TPI Fast Rough Cut – Wood

• Finished size is 4 3/4″ x 4 1/2″
• Make 2 Intarsia roses
• Kit includes wood, tape, backer boards, hangers, pattern & easy instruction sheet

Product Description
This kit includes full size patterns with adhesive backing, the wood required to make this project and instructions. Finished size:4-3/4″ X 4 1/2″ wide. You will need to cut many small pieces for this project. Rounding the edges of the pieces and mounting to a backboard will add depth to this project.

Rose Intarsia Wood Kit

• Finished size is 19″ x 15″
• Made up of 52/105 pieces
• Does not include materials needed to complete project plan

Product Description
Includes full size patterns, wood suggestions and instructions. Finished size: 19″ x 15″. Rounding the edges of the pieces and mounting on a backboard will add depth to this project.

Karate Bear Intarsia Plan

• Finished size is 15″ x13″
• Made up of 34/126 pieces
• Does not include materials needed to complete project plan

Product Description
Includes full size patterns, wood suggestions and instructions. Finished size: 15″ x 13″. Rounding the edges of the pieces and mounting to a backboard will add depth to this project.

Rattlesnake Intarsia Plan

• Finished size is is 10″ x 12″
• Made up of 72 pieces
• Does not include materials needed to complete project plan

Product Description
This plan includes full size patterns, wood suggestions and instructions. The overall size is 10″ x 12″. Rounding the edges of the pieces and mounting to a backboard will add depth to this project.

Yorkshire Terrier Intarsia Plan

• Finished size is 18″ x12.5″
• Made up of 42/62 pieces
• Does not include materials needed to complete project plan

Product Description
Includes full size patterns, wood suggestions and instructions. Finished size: 18″ x 12.5″. Rounding the edges of the pieces and mounting to a backboard will add depth to this project.

Mule Deer Intarsia Plan

• Finished size is 18″ x13″
• Made up of 57/81 pieces
• Does not include materials needed to complete project plan

Product Description
Includes full size patterns, wood suggestions and instructions. Finished size: 18″ x 13″. Rounding the edges of the pieces and mounting on a backboard will add depth to this project.

Desert Tortoise Intarsia Plan

• Finished size is 12″ x 13.5″
• Made up of 85 pieces
• Does not include materials needed to complete project plan

Product Description
Includes full size patterns, wood suggestions and instructions. Finished size: 12″ x 13.5″. Rounding the edges of the pieces and mounting to a backboard will add depth to this project.

Bulldog Head Intarsia Plan

• Finished size is 4 3/4″ x 4 1/2″
• Make 2 Intarsia Iris
• Kit includes wood, tape, backer boards, hangers, pattern & easy instruction sheet

Product Description
This kit includes full size patterns with adhesive backing, the wood required to make this project and instructions. Finished size:4-3/4″ X 4 1/2″ wide. Over 20 pieces. Rounding the edges of the pieces and mounting to a backboard will add depth to this project.

Iris Intarsia Wood Kit

• Jigsaw includes: blade, splinter guard, chip deflector and T-LOC Systainer #1 storage container
• The ergonomic handle makes maneuvering these small and light dust extractors a breeze
• Antistatic suction hose
• Container capacity 3.96 gal
• Maximum suction 99 CFM

Product Description
With a full 720 watts, this is one of the most powerful jigsaws around. It will cut 4 3/4″ wooden beams, 3/4″ aluminum or 3/8″ steel with ease! Electronic Multi-Material Speed Control gives you the correct constant speed for the material youre sawing – prevents overheating and keeps the saw running smoothly. Patented triple blade guidance with parallel adjustable carbide guides that counteract the lateral pressure on the blade so that the Trion makes straight perpendicular cuts every time. Can set a bevel to 45 degrees on either side, and can even start cuts in wood without a pilot hole. 6 Amp motor, 1″ stroke, 1,000-9,000 spm, 4 stage stroke adjustment. Jigsaw includes: blade, splinter guard, chip deflector and T-LOC Systainer #1 storage container. The Cleantec (CT) MINI and CT MIDI are Festools most portable mobile dust extractors. This unit is compact and lightweight, but has enough capacity for common jobsite tasks. The CT MIDI is slightly larger in size, but offers increased capacity for heavier on-site use. Sporting large wheels and double casters, this unit can easily negotiate obstacles in the shop or on the worksite. With 99 CFM and only 62 dB (on low setting), this CT can quickly and quietly remove large amounts of debris, with minimal noise distractions. One disposable filter comes standard on the CT MIDI, with the option of additional dry and wet filters to meet your every need. The integrated hose garage keeps hoses and cords well organized and makes Systainer transport simple and efficient.

Festool PSB 300 EQ Jigsaw with T-LOC + CT Midi Dust Extractor Package

• Finished size is 12.5″ x 13″
• Made up of 48 pieces
• Does not include materials needed to complete project plan

Product Description
Includes full size patterns, wood suggestions and instructions. Finished size: 12.5″ x 13″. Rounding the edges of the pieces and mounting to a backboard will add depth to this project.

Black and White Cat Intarsia Plan

• Finished size is 10.5″ x 10″
• Made up of 89 pieces
• Does not include materials needed to complete project plan

Product Description
Includes full size patterns and instructions for all 89 pieces. Finished size: 10″ square. Rounding the edges of the pieces and mounting to a backboard will add depth to this project.

Blue Jay Intarsia Plan

• Finished size is 16″ x 15″
• Made up of 52 pieces
• Does not include materials needed to complete project plan

Product Description
Includes full size patterns that can be set up for 7 to 10 different horses of varying size and composition. The instructions guide you through all of the different size horses offered. The finished size for the primary horse is about 16″ square. Rounding the edges of the pieces and mounting to a backboard will add depth to this project.

Painted Colt Intarsia Scrollsaw Plan

• Innovative design and versatility
• The ergonomic handle makes maneuvering these small and light dust extractors a breeze
• Antistatic suction hose
• With a full 720 watts, this is one of the most powerful jigsaws around
• Will cut 4-3/4″ wooden beams, 3/4″ aluminum or 3/8″ steel with ease

Product Description
With a full 720 watts, this is one of the most powerful jigsaws around. It will cut 4-3/4″ wooden beams, 3/4″ aluminum or 3/8″ steel with ease! Electronic Multi-Material Speed Control gives you the correct constant speed for the material youre sawing – prevents overheating and keeps the saw running smoothly. Patented triple blade guidance with parallel adjustable carbide guides that counteract the lateral pressure on the blade so that the Trion makes straight perpendicular cuts every time. Can set a bevel to 45 degrees on either side, and can even start cuts in wood without a pilot hole. 6 Amp motor, 1″ stroke, 1,000-9,000 spm, 4 stage stroke adjustment. Jigsaw includes a blade, splinter guard, Systainer (stackable storage container) and chip deflector. The Cleantec (CT) MINI and CT MIDI are Festools most portable mobile dust extractors. This unit is compact and lightweight, but has enough capacity for common jobsite tasks. The CT MIDI is slightly larger in size, but offers increased capacity for heavier on-site use. Sporting large wheels and double casters, this unit can easily negotiate obstacles in the shop or on the worksite. With 99 CFM and only 62 dB (on low setting), this CT can quickly and quietly remove large amounts of debris, with minimal noise distractions. One disposable filter comes standard on the CT MIDI, with the option of additional dry and wet filters to meet your every need. The integrated hose garage keeps hoses and cords well organized and makes Systainer transport simple and efficient.

Festool PS 300 EQ Jigsaw with T-LOC + CT Midi Dust Extractor Package

• Finished size is 15″ x 12″
• Made up of23/50 pieces
• Does not include materials needed to complete project plan

Product Description
Includes full size patterns for all 60 pieces along with suggestions for the woods to be used and a cutting legend. Finished size: 15″ x 12″. Rounding the edges of the pieces and mounting to a backboard will add depth to this project.

Rabbit Intarsia Scrollsaw Plan

• * T-shank jig saw blade
• * Optimized configurations cut precisely and easil
• * Progressor tooth design provides superior perfor
• * Makes straight and very fast cuts
• * Great for hard and soft wood,

Product Description
Features Bosch style Tang shank, (T-shank). Eliminates set-screw mounting hole, which is most common breaking point on Universal Mounting jigsaw blades. Packed 5 blades per card. No. T101B: Wood cutting, 4″ long, 10 TPI, for straight fine cuts No. T101BR: Wood cutting, 4″ long, 10 TPI reverse tooth, for plywood particleboard, plastics- splinter free cuts No. T101D: Wood cutting, 4″ long, 6 TPI, for fast, straight cuts in wood, plastic, and particleboard, Available Only At Cape, Woodburn, Mesquite No. T111C: Wood cutting, 4″ long, 8 TPI, fast, coarse cuts in wood, plastics for jigsaws without orbiting action No. T244D: Wood cutting, 4″ long, 6 TPI, cuts for curves and plunge cuts, Available Only At Cape No. T119BO: Wood cutting, 3″ long, 12 TPI, for narrow curve cutting No. T144D: Wood cutting, 4″ long, 6 TPI, for straight cuts, and plunge and curves No. T101AO: Wood cutting, 3″ long, 20 TPI, for fine, splinter-free cuts No. T234X: Wood cutting, 4-1/2″ long, progressive teeth, for thick and thin materials, Available Only At Cape, Lexington, Woodburn, Mesquite No. T118A: Metal cutting, 3″ long, 24 TPI, for thin, straight cuts in metal, nonferrous metal, aluminum, and sheet metal No. T118B: Metal cutting, 3″ long, 14 TPI, for straight cuts in metal, nonferrous metal, and aluminum No. T118G: Metal cutting, 3″ long, 36 TPI, for very thin material cuts in metal, nonferrous metal, sheet metal, aluminum No. T123X: Metal cutting, 4″ long, progressive teeth, for fast cuts in sheet metal, nonferrous metal, and stainless steel, fiberglass, and plastics,

Jigsaw Blades

• 7″ msnry flare cup wheel
• Silicon carbide masonry cup wheel
• Ideal for smoothing out concrete surfaces
• 5/8″ arbor
• Available Only At Mesquite, Woodburn

Product Description
7″ msnry flare cup wheel. Silicon carbide masonry cup wheel. Ideal for smoothing out concrete surfaces. 5/8″ arbor. Available Only At Mesquite, Woodburn. 7″, heavy material removal

Black & Decker/DWLT DW4773 Masonry Flare Cup Wheel

• Finished size is 16″ x 15″
• Made up of 52 pieces
• Does not include materials needed to complete project plan

Product Description
Includes full size patterns, wood suggestions and instructions. Finished size: 16″ x 15″. Rounding the edges of the pieces and mounting to a backboard will add depth to this project.

Arab Horse Intarsia Plan

• The highest abrasion resistance.
• Outstanding impact strength even at low temperatures.
• Excellent sliding material due to low coefficient of friction
• Self-lubricating, easily machined with common woodworking tools.
• Available in several thicknesses.

Product Description
UHMW Polymer (plastic) is a linear polyethylene with a molecular weight in the range of 3,000,000 to 6,000,000. This value represents the “average molecular weight”. UHMW is 10 times heavier than regular high density polyethylene.

UHMW Sheet 3/8″ x 4″ x 48″ By Peachtree Woodworking – PW1123

• Application Curve Cutting in Aluminum to 5/8″, Plastic Up to 1-1/4″

Product Description
114-T227D This item features: -Ideal for plexiglas. -For thin material. -For thick material. -Ideal for very thin material. -Ideal for aluminum. -For curve cutting. -Ideal for sandwich material. -Cutting Edge Material: HSS. -Shank Type: ”T”. -Tang Shape: Straight. -Type: Jig Saw. Model Code  Model Description AAApplicable Materials:Mild Steel, Non-Ferrous Soft Metal, Plastic, Cutting Length:3 in, Teeth Per Inch:24, Tooth Shape:Wavy Set & Milled, Quantity:100 per pack ABApplicable Materials:Mild Steel, Non-Ferrous Soft Metal, Plastic, Cutting Length:3 in, Teeth Per Inch:24, Tooth Shape:Wavy Set & Milled, Quantity:5 per pack ACApplicable Materials:Mild Steel, Non-Ferrous Soft Metal, Plastic, Cutting Length:4 in, Teeth Per Inch:8, Tooth Shape:Side Set & Milled, Quantity:100 per pack ADApplicable Materials:Mild Steel, Non-Ferrous Soft Metal, Plastic, Cutting Length:4 in, Teeth Per Inch:8, Tooth Shape:Side Set & Milled, Quantity:5 per pack AEApplicable Materials:Mild Steel, Non-Ferrous Soft Metal, Plastic, Cutting Length:4 in, Teeth Per Inch:8, Tooth Shape:Side Set & Milled, Quantity:5 per pack AFApplicable Materials:Mild Steel, Non-Ferrous Soft Metal, Plastic, Cutting Length:5 1/4 in, Teeth Per Inch:14, Tooth Shape:Wavy Set & Milled, Quantity:100 per pack AGApplicable Materials:Mild Steel, Non-Ferrous Soft Metal, Plastic, Cutting Length:5 1/4 in, Teeth Per Inch:14, Tooth Shape:Wavy Set & Milled, Quantity:5 per pack AHApplicable Materials:Mild Steel, Non-Ferrous Soft Metal, Cutting Length:3 in, Teeth Per Inch:14, Tooth Shape:Wavy Set & Milled, Quantity:100 per pack AIApplicable Materials:Mild Steel, Non-Ferrous Soft Metal, Cutting Length:3 in, Teeth Per Inch:14, Tooth Shape:Wavy Set & Milled, Quantity:5 per pack AJApplicable Materials:Mild Steel, Non-Ferrous Soft Metal, Cutting Length:3 in, Teeth Per Inch:24, Tooth Shape:Wavy Set & Milled, Quantity:5 per pack AKApplicable Materials:Mild Steel, Non-Ferrous Soft Metal, Cutting Length:3 in, Teeth Per Inch:36,

Bosch T227D 4″ x 8TPI HSS T-Shank Jigsaw Blades 5-Pack

• Easy to follow instructions
• Shop tested measured drawing and instructions
• Wood plans contain no hardware, materials or accessories
• Crib: 57″ wide x 32″ deep x 44″ high.
• Toddler Bed: 57″ wide x 32″ deep x 43″ high; Full Bed: 57″ wide x 83″ deep x 43″ high

Product Description
Like a best friend, this bed grows up with your child. Starting as a crib for a newborn, this “Sleep System” easily changes into a bed for a toddler, and then into a full bed, serving a child well past adolescence. Simple decorative connector bolts and concealed cross dowels make these quick changes possible. Build all the parts now and be years ahead, or choose any one of the three beds to meet current needs.

3 IN 1 BED WOODWORKING PAPER PLAN PW10057

• Straightens crooked boards
• Simple, inexpensive
• Does shallow taper cuts

Product Description
General’s E-Z Jointer Clamp Kit is the long-awaited alternative to expensive jointers. Now, you can straight-line rip crooked boards using your table saw! Just attach your crooked board to a piece of straight stock using the Jointer Clamps and run the stock along the rip fence to rip the crooked board. The Jointer Clamp works in two easy passes and is great for use with long stock. Additionally, our patented swing arm design allows you to accurately rip wide boards with ease.

General Tools #846 EZ Jointer Clamps, 2-Pack

• Fully enclosed heavy-duty aluminum fence provides unmatched rigidity, strength and precision to your router top and helps to maintain an enclosed vacuum for superior dust collection.
• Professionally edge-banded MDF top absorbs vibration and noise like no phenolic top can. It features an Easy-Slide Micro-Dot skin – made from an impact resistant high-pressure laminate – which makes it easy to slide work pieces across the surface.
• 9 1/4-Inch x 11 3/4-Inch x 3/8-Inch thick phenolic insert plate works with any router and comes with unique bottom-up levelers with 8 adjustable points of contact.
• Independent Fence Faces Allow the Table to Double as a Vertical Jointe
• Universal steel stand is made from heavy gauge steel, includes 4 leveling feet and is adjustable from 31-Inch to 36–Inch.

Product Description
Kreg PRS1040 Precision Router Table System is set to make a real name for itself in the industry. Includes a series of ground-breaking new features, including the innovative self-squaring t-square style fence, the fully enclosed tubular aluminum extrusion, and the steel-strut reinforced MDF top with its Easy-Slide Micro-Dot Skin, just to name a few. This item ships in three different boxes: the router table, the router fence, and the table legs.Amazon.com Product Description
Taking design cues from high-end table saw rip fences, the Kreg Precision Router Table System features a fully enclosed, t-square style fence for complete use of your miter slot and small adjustments on the fly. Its vibration and noise resistant MDF table has a high-pressure laminate Easy-Slide Micro-Dot skin, which makes it easy to slide workpieces across the surface. It also boasts a precise insert plate that mounts to any router without the usual extra holes you don’t need. Bottom-up levelers feature eight individual contact points for leveling accuracy, and dual reducing rings (2 inches; 1-13/16 inches) provide the convenience of Porter Cable guide bushing capability. For added flexibility, independent fence faces allow the table to double as a vertical jointer.

Precision Router Table System At a Glance: Fully enclosed, aluminum fence for superior precision and dust collection Edge-banded MDF top absorbs vibration and noise; easy-slide micro-dot skin 9-1/4 x 11 3/4 x 3/8-inch thick phenolic insert plate works with any router Individual fence faces allow table to double as a vertical jointer Dual reducing rings boast three independent leveling/lock-down screws

Unique t-square style fence keeps the fence permanently parallel to the miter slot.

Precise insert plate designed to mount to any router enables a perfect custom fit.

Finish Projects Faster, Easier, and With Greater Precision
A quality router table is one of the most important tools for any serious woodworker. Whether you’re routing a simple dado, putting the finishing touch on a countertop, or building an entire set of raised panel doors from scratch, the Kreg Precision Router Table’s innovative features will help you finish projects faster, easier, and with greater precision than ever before.

Innovative Fence Design Provides Automatic Squaring
The Precision Router Table fence has a t-square style design that keeps the fence permanently parallel to the miter slot. This automatic squaring lets you fully utilize your miter slot and makes it easier than ever to make small adjustments on the fly. The fence is made from an incredibly rigid fully-enclosed aluminum extrusion which supports even the largest workpieces, and creates a full length vacuum chamber for superior dust collection and a cleaner shop. The fence also includes two fully independent fence faces, allowing the router table to double as a vertical jointer.

Vibration and noise resistant MDF table top and flexible steel stand.

Rugged MDF Table-Top
This router’s professionally edge-bended tabletop is made from vibration and noise resistant MDF with a high-pressure, impact-resistant laminate skin that makes it easy to slide workpieces across the surface. Two steel support struts prevent bending or bowing, and the combination miter/t-slot works with a variety of accessories for greater project flexibility.

Precise Insert Plate
Made from an incredibly durable phenolic, this standard sized insert plate (9-1/4 x 11-3/4 x 3/8 inches) has been designed to mount to any router without the usual “swiss cheese” type surface found on most router table insert plates. Utilizing your router’s base plate and the easy to use template (included), mounting the insert plate to almost any router leaves you with a perfect custom fit completely free of extra holes.

Dual reducing rings (2 inches; 1-13/64 inches) boast three independent leveling/lock-down screws and compatibility with standard Porter-Cable guide bushings for fast and easy template routing on your router table.

For even greater precision, the lens cursor offers incredible accuracy without a tape measure and pencil.

Flexible Steel Stand
The Precision Router Table Top rests on the Kreg Universal Steel Stand, which is also the base of the popular Klamp Table. This rugged stand is adjustable from 31 to 36 inches in height, and is constructed from incredibly durable steel. For additional mobility, Kreg 3-inch dual-locking casters can be added at any time.

Product Description
The Precision Router Table measures 41 x 32-1/4 x 24 inches (HxWxD) and weighs 85 pounds.

What’s in the Box
Precision router table, fence, table legs, and instruction manual.

Kreg PRS1040 Precision Router Table System

• Clean for Wood blades ensure fine, clean cuts in a variety of materials
• T-shank blades suitable for jig saws from Bosch, AEG, Dewalt, ELU, Hitachi, Makita, Metabo, Milwaukee and others (sold separately)
• Applications in Hard/soft woods, Plastics, Plywood, Laminated particleboard 3/16″ – 1-1/4″
• Bosch is the world-wide market leader for jig saw blades.
• This means uncompromising quality, innovative ideas and universal use.

Product Description
114-T101B100 This item features: -For fine, splinter-free cuts on both sides of workpiece. -Ideal for straight, fine cuts. -Splinter-free cutting through down cutting teeth. -Ideal for fast, straight cuts. -Ideal for parallel and angled cuts. -Ideal for jig saws without orbiting action. -For narrow curve cutting. -Ideal for straight, parallel cuts. -For curve cutting. -Ideal for fast, fine cuts. -For very fast, fine cuts. -Cutting Edge Material: Carbon Steel. -Shank Type: ”T”. -Tang Shape: Straight. -Type: Jig Saw. Model Code  Model Description AAApplicable Materials:Laminated Surfaces, Wood, Plastic, Soft Metal, Plywood, Cutting Length:3 in, Teeth Per Inch:20, Tooth Shape:Pointed & Ground, Quantity:5 per pack ABApplicable Materials:Soft/Hard Wood, OSB, Plywood, Cutting Length:4 in, Teeth Per Inch:6, Tooth Shape:Side Set & Ground, Quantity:5 per pack ACApplicable Materials:Softwood, OSB, Plywood, Cutting Length:3 in, Teeth Per Inch:12, Tooth Shape:Side Set & Ground, Quantity:5 per pack ADApplicable Materials:Softwood, OSB, Plywood, Cutting Length:4 in, Teeth Per Inch:8, Tooth Shape:Side Set & Milled, Quantity:5 per pack AEApplicable Materials:Wood, Plastic, OSB, Plywood, Particleboard, Cutting Length:4 in, Teeth Per Inch:10, Tooth Shape:Ground & Taper, Quantity:5 per pack AFApplicable Materials:Wood, Plastic, OSB, Plywood, Particleboard, Cutting Length:4 in, Teeth Per Inch:10, Tooth Shape:Ground & Taper, Quantity:5 per pack AGApplicable Materials:Wood, Plastic, Cutting Length:4 5/8 in, Teeth Per Inch:8, Tooth Shape:Ground & Taper, Quantity:5 per pack AHApplicable Materials:Wood, Plastic, Cutting Length:4 in, Teeth Per Inch:10, Tooth Shape:Ground & Taper, Quantity:100 per pack AIApplicable Materials:Wood, Plastic, Cutting Length:4 in, Teeth Per Inch:6, Tooth Shape:Ground & Taper, Quantity:100 per pack AJApplicable Materials:Wood, Plastic, Cutting Length:4 in, Teeth Per Inch:6, Tooth Shape:Ground & Taper, Quantity:5 per pack AKApplicable Materials:Wood,

Bosch T101B100 Wood & Plastic Clean Cut 4″ x 10 TPI T-Shank Style Jigsaw Blades 100-Pack

• Designed for use with Magswitch Universal Mounting Base
• Two sets of precision sealed roller bearings

Product Description
The Magswitch Dual Roller Guide Tool Attachment is for use with the Magswitch Workholding System. It mounts to your Universal Mounting Base and features a dual set of roller bearing supports for firm yet smooth gliding of wood through a blade or cutter.

MagJig Dual Roller Fence

• Thick metal
• 3 blades
• Brand name

Product Description
3 pack of jigsaw replacement blades

Black & Decker Firestorm 14 TPI Thick Metal Jigsaw Blade 3 Pack

• Longitudinal Stop
• For Festool multi-function tables 800 and 1080

Product Description
Adjustable stop for use on Festool MFT 800 and MFT 1080. NOTE: No International shipping on any Festool item. Items marked “Direct Ship” can only be shipped within the Continental United States.

Longitudinal Stop

Product Description
A powerful saw to do those heavy-duty contour cutting jobs! Variable speeds up to 3100 SPM. Has four settings of blade orbit for cutting into different types of materials. Footplate can be angled for bevel cuts. Includes blade change and footplate adjustment tools. Uses Tang Shank style blades.

Grizzly G8994Z VS Jigsaw – President’s Special!

• P205 Cordless Drill
• P501 Cordless Circular Saw and Blade
• P111 Charger
• P100 ONE+ 18V Battery

Product Description
* P205 Cordless Drill
* P501 Cordless Circular Saw and Blade
* P111 Charger
* P100 ONE+ 18V Battery
* Operator’s Manual

Features and Specifications are as follows:

Drill

· 2-speed gearbox for high torque applications

· 3/8 inch heavy duty keyless chuck for quick and easy bit changes

· 24 position clutch controls torque output

· MagTrayTM magnetic holder for convenient placement of bits and screws

· On-Board bit storage keeps screwdriver bits conveniently located with drill

· Overmold grip handle for added comfort

· 0-350 / 0-1,300 (no load speed) RPM

· Weighs 3.1 lbs.

Circular Saw

· Spindle lock with on-board wrench storage for quick and easy blade changes

· Bevels 0° to 51.5° for angled cuts

· Ergonomically designed handle with overmold increases user comfort

· Left side blade provides improved cut like visibility

· 5-1/2″ carbide-tipped blade for extended blade life

· 4,200 (no load speed) RPM

· Weighs 4.7 lbs.

· Cut capacities: 90° = 1 9/16″; 45° = 1 1/18″

The Ryobi Drill and Circular Saw Kit is the perfect addition to the Ryobi ONE+ System. This kit includes a Ryobi cordless drill, circular saw, NiCd battery and charger at a great price. The drill is equipped with a 3/8 inch two sleeve keyless chuck with spindle lock making it easy to change bits during a variety of applications. A 2-Speed transmission and 24 position clutch for more demanding projects that might require higher torque. In addition to these great features the circular saw includes a left sided 5-1/2 inch carbide tipped blade for improved cut line visibility and extended blade life. The Ryobi Drill and Circular Saw Kit is the perfect introduction or addition to the Ryobi 18V ONE+ system

Ryobi Drill and Circular Saw Combo 18V ONE System

Product Description
Carbon fleam ground jigsaw blade that is precision ground for smooth cutting in hard and soft wood, plastics, laminate, particle board, and plywood. Features a U shank design. No. 3071406: 6TPI No. 3071410: 10TPI No. 3071412: 10TPI

Irwin 3071412 All-Purpose Wood Jigsaw Blade

• 18V Lithium-ion AutoShift Drill – P250
• Saves time by automatically operating at the optimal setting
• Automatic gearbox shifts to match any application
• Heavy-duty motor delivers speed and torque on demand
• LED changes from speed to power when drill auto-shifts

Product Description
Homeowners and professionals looking to upgrade to a serious combo kit can call off the search. The new Ryobi 18-volt lithium-ion AutoShift drill is the star of a 4-piece combo kit ideal for dedicated and determined DIYers. The innovative drill saves time and guesswork by automatically operating at the optimal setting. It makes drilling and driving easier and faster because you don’t have to select which speed to use – the drill chooses for you. For optimum adaptability, the combo kit includes two batteries. The high-capacity lithium-ion battery provides twice the performance and holds the charge 4 times longer, optimizing charge cycles. An on-board battery gauge helps ensure you won’t run out of power in the middle of a project. For work in tight spaces, the lightweight compact lithium-ion battery offers 20% more performance and reduces user fatigue.

This is a factory reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new condition. Some tools may contain cosmetic blemishes. Includes 18-volt lithium-ion AutoShift drill, P250; 18-volt lithium-ion circular saw, P503; 18-volt lithium-ion reciprocating saw, P513; 18-volt lithium-ion work light, P703; 18-volt lithium-ion battery, P104; 18-volt lithium-ion compact battery, P103; 18-volt dual chemistry charger, P113; tool bag; operator’s manual

Factory-Reconditioned Ryobi ZRP844 ONE Plus 18V Cordless Lithium-ion 4-Piece Combo Kit

• “ACE” JIGSAW T BLADE
• 8″ TPI
• Overall length 3 1/4″
• Working length 2 3/16″
• Blade height .15″

Product Description
“ACE” JIGSAW T BLADE

* 8″ TPI
* Overall length 3 1/4″
* Working length 2 3/16″
* Blade height .15″
* Blade thickness .04″
* High carbon steel precision filed and set for maximum cutting
* Performance in ferrous and non ferrous metals
* Hollow ground blade produces smooth finish cuts
* 2 pack
* Carded

Bosch 2198661 Jigsaw T Blade 8″ Tpi

• “ACE” T-SHANK JIGSAW BLADE
• 14 TPI
• Overall length 3-5/8″
• Working length 2-5/8″
• Blade height .30″

Product Description
“ACE” T-SHANK JIGSAW BLADE

* 14 TPI
* Overall length 3-5/8″
* Working length 2-5/8″
* Blade height .30″
* Blade thickness .04″
* High carbon steel – precision filed and set for maximum cutting performance in ferrous and non-ferrous metals
* Straight cuts medium- thin metals 1/8″ – 1/4″
* 2 pack carded

Bosch ACET14MT 14 Tpi T-shank Jigsaw Blade 3-5/8″

• Accepts standard 5 in. pin-end and plain-end scroll saw blades
• Multi-directional dust blower keeps cutting line free of dust and debris
• Large cast iron work table tilts up to 45 degrees (left) for bevel cutting
• Variable speed (400 to 1600 spm) for cutting soft or hard woods, plastic or soft metals
• Dust extraction port (1-1/4 in.) for connecting to vacuum cleaner

Product Description
This variable speed scroll saw from Craftsman features a multi-directional dust blower to keep the cutting line free of dust and debris, as well as a large cast iron work table that tilts up to 45 degrees for bevel cutting. With variable speed control (400 to 1600 spm), its perfect for cutting anything from soft or hard woods to plastic and soft metals.

Craftsman 16 in. Variable Speed Scroll Saw

• “ACE” T-SHANK JIGSAW BLADE
• 14″ TPI
• Blade length 3 1/8″
• Fast cutting in wood up to 2″
• Hollow ground blade produces smooth finish cuts

Product Description
“ACE” T-SHANK JIGSAW BLADE

* 14″ TPI
* Blade length 3 1/8″
* Fast cutting in wood up to 2″
* High carbon steel – precision filed and set for maximum cutting performance in ferrous and non ferrous metals
* Hollow ground blade produces smooth finish cuts
* 2 pack
* Carded

Bosch 2198687 “T-shank” Jigsaw Blade 14″ Tpi

• Designed for use with Magswtch system
• Muti-use

Product Description
The Vertical Featherboard Tool Attachment is for use with the Magswitch Workholding System or Pro Table Featherboard.

Pro Vertical Attachment with Risers

• 20 teeth per inch for extra smooth cutting
• Cuts wood and soft materials
• Hook-shank style blade fits bayonet saw models 548, 648, 7349, 7549, and 7649
• Five pack

Product Description
For extra smooth upcut/downcut blade for wood scroll especially where tight radius cuts are required. 3″ blade length, 20 TPI, taper, 3/16″ blade width. 2 1/8″ cutting depth with model #548 and 1-1/2″ cutting depth with model #648, #7349, #7549 and #7649. 5 per pack.

2 Pack Porter Cable 12320-5 3″ x 20 TPI Wood and Composition Hook Shank Blades 5 Blades per Package

• Build you own customized router table.
• Marc’s DVD includes all his latest tips, techniques & router table secrets.
• Creative solutions to every woodworking challenge.
• Study his techniques at your convenience, then build your own router table.

Product Description
Marc’s DVD includes all of his latest tips, techniques & router table secrets. If you have seen his live demos, you know that he’s the master of the router table. Now you can see all of his latest ideas in one informative video.

ROUTER TABLES MADE EASY with Marc Sommerfeld

• AMERICAN MADE FOR THE AMERICAN WOODWORKER
• MADE FROM SOLID ALLOY STEEL
• PRECISION GROUND FOR PROPER BALANCE AT HIGH RPMS
• MADE WITH THICK CARBIDE FOR EXTRA SHARPENINGS
• USES THE HIGHEST QUALITY AMERICAN MADE MICROGRAIN CARBIDE

Product Description
Whiteside Seven Piece Bit Set for the Leigh Jig. Contains: 8º x 11/16″ dovetail, 1″ CL, 1/2″ SH; 1/2″ D x 1/2″ SH straight; 14º x 1/2″ dovetail, 1/2″ CL, 8mm SH; 18º x 1/2″ dovetail, 3/8″ CL, 8mm SH; 5/16″ D x 1″ CL, 8mm SH straight; 8º x 7/16″ dovetail, 5/8″ CL, 8mm SH; 1/2″ to 8mm collet adapter.

Whiteside Leigh 7 Piece Bit Set

• Easy to follow instructions
• Shop tested measured drawing and instructions
• Simple joinery
• Wood plans contain no hardware, materials or accessories
• Measures 50″ wide, 18″ deep, 33-1/16″ tall.

Product Description
Either as a stand-alone project or as a complement to our table and chairs, you’ll find the buffet a worthy addition to your home’s decor. Made from oak and accented with reproduction brass hardware, our buffet boasts ample storage.

MISSION ADDITION WOODWORKING PAPER PLAN PW10048

• Disston #279299 MM3″MED Bosch Jig Blade
• DISSTON COMPANY

Product Description
Master Mechanic, 3″ Medium Grit-Edge, Bosch Style, Jig Saw Blade, Made Of Heat Resistant Steel With Tungsten Carbide Particles Which Eliminates Premature Dulling Versus Conventional Blades, Blades Cut On The Push & Pull Stroke For A Smooth Clean Finish, Specially Designed To Cut Fiberglass, Ceramic Tile, Laminates & Composites, Carded.

Disston #279299 MM3″MED Bosch Jig Blade

• First 18 volt cordless table saw, drill press and scroll saw in the world.
• More than 8 functions: table saw, drill press, scroll saw, circular saw, jigsaw, drill/driver, halogen light and 3 bubble spirit level
• Patented, unique and universal POWERhandle. Lightweight soft grips and ergonomic form
• 18 volt cordless technology
• Fast 1 hour Charging System

Product Description
The versatile POWER8 workshop is the world’s first cordless workstation that also gives you the option to use each tool as a portable hand-held or a powerful benchtop tool. Ideal for professional tradesmen and DIY enthusiasts, the POWER8 workshop includes an innovative stainless steel armored case that transforms four 18-volt cordless tools into their powerful benchtop equivalents.Amazon.com Product Description
The versatile POWER8workshop is the world’s first cordless workstation that also gives you the option to use each tool as a portable hand-held or a powerful benchtop tool. Ideal for professional tradesmen and DIY enthusiasts, the POWER8workshop includes an innovative stainless steel armored case that transforms four 18-volt cordless tools into their powerful benchtop equivalents.

A halogen flashlight/table light keeps work spaces well lit. View larger.

The drilldriver offers 21 torque settings and doubles as a drill press. View larger.

The circular saw clips into the case for use as a sturdy, accurate table saw. View larger.

The jigsaw doubles as a scroll saw. View larger.

Do-It-Yourself Convenience with Professional Results
The POWER8workshop includes everything you need to complete your tasks in one compact package. With this innovative system, you have four convenient, 18-volt hand-held tools at your disposal. And for added versatility, each of the tools easily slides into the armored case and becomes a powerful table-top tool.

The POWER8workshop includes a cordless drill driver that converts quickly into a bench top drill press; a circular saw that can be converted to a table saw; a jig saw that turns into a scroll saw; and a handy halogen light that converts into a bench top table light.

The tools are stored in a sturdy canvas bag that fits neatly into the durable steel armored case, which also doubles as the system’s portable bench top. When your project is complete, simply pack it all up and tuck it out of the way–every tool has its own place in the carrying case for easy storage and portability.

Innovative 18-volt Powerhandles
At the heart of the POWER8workshop are interchangeable 18-volt Powerhandles. Powered by rechargeable 18-volt batteries, the handles attach easily to each tool, and they also slide effortlessly into the integrated docks on the table when your project requires a sturdy bench-top tool to get the job done.

The one-hour fast charger is built into the case so there is no need to unpack anything to start charging the batteries; there’s also a secondary charger point so that you can charge a battery at the same time as using another to power the benchtop functions.

Cordless Drill Driver Transforms into Cordless Drill Press
The drill features a two-speed metal gear box with spindle lock, 3/8-inch keyless chuck, 21 torque settings, and two double-ended driver bits. It offers a no-load speed of 0-350 RPM and 0-950 RPM.

Cordless Circular Saw Transforms into a Cordless Table Saw
Clip the circular saw into the case’s lid to turn the POWER8worshop into a shielded table saw that safely tackles a variety of cuts. The 5-1/2-inch blade is backed by a 700 class motor and all-metal gearbox with spindle lock. The saw offers 3500 RPM no-load speed, an adjustable cutting depth of up to 1.5 inches, bevel cuts of up to 45 degrees, and a rip fence and protractor.

Cordless Jigsaw Transforms into a Scroll Saw
The jigsaw doubles as a scroll saw for cutting tight patterns. It features a variable speed 2400 RPM motor for bevel cuts up to 45 degrees, and metal and wood cutting of up to 1.6 inches in depth. The integrated blade guard keeps you safe as you work.

Cordless Flashlight Transforms into Table Light
Attach the halogen flashlight to the table so you can easily see your work, even in low-light environments. The 0.6-amp bulb lasts up to 300 hours, and the lamp switches easily from pistol-grip to torch-style. A spare bulb is included in the swivel head, and the lamp offers either a 0- to 90-degree flash, or a constant control.

What’s in the Box
POWER8workshop case, one-hour charger with secondary charger, two POWERhandles, drilldriver head, circular saw head, jigsaw head, halogen flash light head, table clamp, table saw shield, spirit level (post/fence), protractor, push stick (pillar drill lever), canvas bag, two accessory cases (assortment of drill bits, driver bits, blades, screws).

The unique, armored case and convenient canvas bag make it easy to transport tools and keep them organized. View larger.

POWER8 Workshop WS1 Full Workshop-in-One with Armored Case

Product Description
18V RECIPROCATING SAW – CORDLESS – 18V Pro-Grade Reciprocating Saw with Orbital cutting action. The Rockwell 18V battery-operated reciprocating saw offers 4-stage orbital action and other user-friendly features like variable speed, adjustable front shoe and the patented Rockwell 30-secondTM blade change system.

Rk2802k 18v Rec Saw W/Bat.Chg

• 18v Cordless Jigsaw
• Uses common BD style blades
• Very well balanced, comfortable to use and controllable
• Base plate can be angled in either direction
• Converts to Scroll saw when used with POWER8workshop

Product Description
This product has been designed to be ergonomic and powerful; with variable speed it is easy to cut accurately to your marking. Supplied with 2 Metal and 2 Wood Blades. Tilting base for Bevel cutting up to 45 degrees. Rolling Blade support and on product storage for the Hex Key.

POWERhandle,(Battery) and Charger purchased separately.

WS1-JS01

CEL Cordless Jigsaw WS1-JS01

Product Description
This Accessory Case contains: 4 Jigsaw Blades (2 metal and 2 wood), spare Hex Keys (1 for the Jigsaw 3mm, and 1 for the Circular Saw 5mm), 2 Spade Drill bits 12mm and 16mm

WS1-AP02

CEL Accessory Case – Standard Pack 2 WS1-AP02

• 3-5/8″ Length, Bi-Metal Construction
• 24 Teeth per Inch, Milled
• T-Shank
• 2 Blades per Package
• Replaces T118A/T118AF

Product Description
Tough, sharp, shatterproof bimetal blades for cutting steel, nail embedded wood, masonite, conduit, composition materials, laminated counter tips. Tang shank (T shank) fits most jigsaws. 2 blades per card. No. BT314S: 3 5 8″, 14TPI, thick metal cutting, g

Lenox BT324S T-Shank Jigsaw Blade

Product Description
Features Bosch style Tang shank, (T shank). Eliminates set screw mounting hole, which is most common breaking point on Universal Mounting jigsaw blades. Packed 5 blades per card. No. T101B: Wood cutting, 4″ long, 10 TPI, for straight fine cuts No. T101BR:

Robt Bosch Tool Corp Accy T118G Jigsaw Blades

• 20757-CT450J JIG BLD U-SH 10T
• JIGSAW BLADE U-SHANK 10TPI

Product Description
High carbon steel blades designed for wood cutting and scroll cuts in wood. Fleam ground teeth for faster, rough cuts, and straight line sawing. Packed 2 blades per card. No. CTS406J: 4″, 6TPI, milled and set, fast, rough wood cutting No. CT456J: 4″, 6TPI

Lenox CT450J Lenox Jigsaw Blade

• #58 Tang Shank Jig Saw Blades
• For fast cutting. 8 TPI, 3 1/8″ cutting length.
• 5 per pack.

Product Description
High carbon steel. Blade No.58. WOOD CUTTING: Fast cutting of wood and plastics. wood, plywood and plastics 3/16″ to 2-9/16″ .